User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
![](/manual/jvc/gy-hc550u/user-s-manual-english-french-portuguese/images/img-110.png)
Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P133 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When “On
” is selected, set the Level.
To turn on the
[Hard Lock] function, configure OIS
to “Off”.
[Setting Values: On, ROff]
(A P73 [Using the Image Stabilizer] )
9
Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
0
The icon changes according to the level set.
(A P161 [Image Stabilizer Mark] )
0
When “High” is selected, correcting severe
camera shake may cause the area surrounding
the image to darken.
9
Hard Lock
When
the
Hard Lock feature is “On”, the IS (image
stabilization) lens is locked in place.
Use this feature when blurry image caused by
camera shake tends to occur due to strong
acceleration.
[Setting Values: On, ROff]
(A P73 [About the Hard Lock Feature] )
Memo :
0
Camera shake that causes image blur occurs
when switching between “On” and “Off”.
Shutter
For specifying shutter-related settings.
Configure the value to “Step” (fixed value) or
“Variable
” when operating the shutter with the
cross-shaped button (J K) on the side of the
camera recorder unit.
0
Variable:
Sets to variable scan. Use this setting when
shooting a PC monitor.
0
Step:
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
AE Level
For setting the convergence level during AE (Auto
Exposure).
This can also be adjusted using the cross-shaped
button (H I) on the side of the camera recorder
unit.
[Setting Values: -6 to +6 (R0)]
AE Speed
For setting
the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AE Area
For configuring the AE detection area.
[Setting Values: Center, Bottom, RNormal]
AGC Limit
For setting the maximum gain value of “AGC
”,
which electrically boosts the sensitivity level
according to the brightness automatically.
0
When [LCD/VF]
B [Display Type] B [Gain] is set
to “dB”:
[Setting Values: 24 dB, R18 dB, 12 dB, 6 dB]
0
When [
LCD/VF]
B [Display Type] B [Gain] is set
to “ISO”:
[Setting Values: ISO 12800, RISO 6400, ISO
3200, ISO 1600]
Memo :
0
When [FULL AUTO]
is set to “ON”, this item
appears as “---” and cannot be selected.
Camera Function Menu
111
Menu Display and Detailed Settings