User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Black Toe
Process the
dark areas according to the balance of
bright and dark areas in the image to adjust the
overall balance of contrast.
For altering the gain of dark areas. Adjust this item
according to the condition of the captured video
signals.
0
Stretch:
Increases the gain of dark areas in an image to
stretch the signals of these areas only, thereby
showing the contrast between bright and dark
areas more clearly.
Specify the amount of stretch with [Stretch
Level].
0
Normal:
Normal condition.
0
Compress:
Compresses the gain of dark areas to increase
the contrast when the entire image appears
bright and contrast is weak. Specify the
compression amount with [Compress Level
].
[Setting Values: Stretch,
RNormal, Compress]
Memo :
0
This item cannot be configured when [Color
Space
] is set to “J-Log1” or “HLG”.
0
This item cannot be configured when
[
Infrared]
is set to “On”.
9
Stretch Level
Stretch amount increases when a larger value is
specified.
[Setting Values: 5 to 1 (R 3)]
Memo :
0
This item is displayed only when [
Black Toe] is
set to “Stretch”. Otherwise, this item appears as
“---” and cannot be selected.
0
This item cannot be configured when
[Color
Space] is set to “J-Log1” or “HLG”.
0
This item cannot be configured when
[
Infrared]
is set to “On”.
9
Compress Level
Compression amount increases when a larger
value is specified.
[Setting Values: 5 to 1 (R 3)]
Memo :
0
This item is displayed only when [
Black Toe] is
set to “Compress”. Otherwise, this item appears
as “---” and cannot be selected.
0
This item cannot be configured when [Color
Space] is set to “J-Log1
” or “HLG”.
0
This item cannot be configured when
[Infrared
]
is set to “On”.
Knee
For specifying the “Knee” operation, which
compresses video
signals beyond a certain level to
show the gradation of the highlighted portion. To
check the gradation of a bright area, set to “Manual”
and adjust the knee point (starting point of knee
operation) manually.
0
Manual:
Enables
manual
adjustment of knee point using
[Level].
0
Auto:
Adjusts the knee point automatically according
to the luminance level.
[Setting Values: Manual, RAuto]
Memo :
0
This item cannot be configured when [Color
Space
] is set to “J-Log1” or “HLG” and when
[Gamma] is set to “Cinema 2”.
0
This item cannot be configured when [Infrared
]
is set to “On”.
9
Level
For setting the starting point (knee point) of knee
compression when [Knee] is set to “Manual
”.
[Setting Values: 100.0%, 97.5%, R
95.0%, 92.5%,
90.0%, 87.5%, 85.0%, 82.5%, 80.0%, 77.5%,
75.0%, 72.5%, 70.0%]
Memo :
0
This item cannot be configured when [
Knee] is
set to “Auto”.
0
This item cannot be configured when [Color
Space] is set to
“J-Log1” or “HLG”
and when
[Gamma] is set to “Cinema 2”.
0
This item cannot be configured when
[Infrared]
is set to “On”.
120
Camera Process Menu
Menu Display and Detailed Settings