User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
HDMI OUT
For configuring video output from the [HDMI]
terminal.
[Setting Values: On,
ROff]
Memo :
0
Monitor and menu displays are not output from
the [HDMI] terminal.
9
Resolution
For selecting
the resolution of video output from the
[HDMI] terminal according to the monitor to be
connected.
[Setting Values: 2160/60p, 2160/50p, 2160/30p,
2160/25p, 2160/24p, 1080/60p, 1080/50p,
1080/30p, 1080/25p, 1080/24p, 1080p, R1080i,
720p, 576p, 576i, 480p, 480i, 480p(2:3pd)]
Memo :
0
The selectable options vary according to the
settings in [System] B [Record Set]
B [Record
Format] B [System] and [WResolution]/
[GResolution].
0
Cross conversion output is not possible.
0
When in the Camera mode, selecting
“SD
” for
[System] B [Record Set] B [Record Format] B
[System] fixes the resolution at “480p” or “576p”.
9
Color
For setting the color format of HDMI signals.
[Setting Values: RGB, RAuto]
Memo :
0
This item can be configured when [HDMI OUT]
is set to a setting other than
“Off”.
9
Colorimetry
For configuring the colorimetry of the HDMI signal
when [Camera Process]
B [Color Space] B
[Colorimetry] is set to “ITU2020”.
0
ITU2020:
Outputs using the colorimetry of ITU2020
regardless of the device that is connected via
HDMI.
0
ITU709:
Outputs using the colorimetry of ITU709
regardless of the device that is connected via
HDMI.
0
Auto:
Switches the colorimetry automatically
according to the device that is connected via
HDMI.
[Setting Values: ITU2020, ITU709, RAuto]
Memo :
0
This item can be configured when [HDMI OUT]
is set to a setting other than “Off”.
0
This item can be configured when
[HDMI
Color
] is set to “Auto”.
0
This item cannot be configured when [Camera
Process] B [Color Space
]
B [Colorimetry] is set
to a setting other than “ITU2020”.
9
Enhance
For
setting
the color range of HDMI signals. When
connecting to a PC monitor, set this to “On”.
[Setting Values: On, ROff]
Memo :
0
This item can be configured when [HDMI OUT]
is set to a setting other than
“Off”.
A/V Set Menu
131
Menu Display and Detailed Settings