User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
![](/manual/jvc/gy-hc550u/user-s-manual-english-french-portuguese/images/img-138.png)
o
FEC Matrix
For setting the amount of FEC (Forward Error
Correction) overhead for configuring
SMPTE2022-1.
(A P209 [Setting the FEC Matrix] )
Memo :
0
This item is selectable only when [SMPTE
2022-1 FEC
] is set to “On”.
Resolution
For setting
the resolution of the video image during
live distribution.
The available options vary according to the settings
for [WResolution] and [WFrame Rate] under
[Record Format].
W Resolution
Setting Value
1920x1080
1440x1080
1920x1080, 1280x720,
640x360, 720x480,
720x576
1280x720 1280x720,
640x360
720x480 (U model) 720x480
720x576 (E model) 720x576
Memo :
0
The setting cannot be changed during live
streaming (when [Live Streaming
] set to “On”).
0
The Aspect
Ratio for the live streaming image is
fixed to “16:9”.
Frame Rate
For setting
the frame rate of the video image during
live distribution.
The options vary according to the settings of [Live
Streaming Set] B [Resolution] and the [WFrame
Rate] settings under [Record Format].
W Frame Rate
Setting Value
60p, 60i 60p, 60i, 30p
50p, 50i 50p, 50i, 25p
30p 30p
25p 25p
Memo :
0
The setting cannot be changed during live
streaming (when live streaming is configured to
“On”).
Bit Rate
For setting the encode bitrate of the video image
during live distribution.
The selectable options vary according to the
settings in
[Live Streaming Set] B [Resolution] and
[Bit Rate].
For details on the settings, please refer to
[Distributable [Record Format] and [Live Streaming
Set] Combinations] (A P 206).
Memo :
0
The setting cannot be changed during live
streaming (when [Live Streaming] set to “On”).
0
Depending on
the type of network adapter used
and the connection, images and audio sound
during live streaming may be choppy.
Return over IP Item
Function A
For configuring the Return over IP function to
Enable
or
Disable when in the QuickTime(MPEG2)
or MXF(MPEG2) mode.
[Setting Values: Enable, RDisable]
Memo :
0
Configure this
item when “QuickTime(MPEG2)”
or “MXF(MPEG2)” is selected for [System] B
[Record Set] B [Record Format] B [WFormat].
The live streaming images may turn out different
depending on whether this item is configured to
“Enable” or “Disable”. It is recommended that
this item be configured to “Disable” if only live
streaming is to be used.
0
When this is configured to “Enable” and
[Camera Process
]
B [Color Space] is
configured to “J-Log1” or “HLG”, live streaming
settings will be as follows.
0
[
Color Space
] “ITU709”
0
[Gamma
] “Standard”
0
[Knee]“Manual
”/[Level]“95.0%”
0
[Color Matrix
] “Standard”
Return over IP
For configuring Return over IP to On/Off.
[Setting Values: On, ROff]
Memo :
0
This is fixed at
“Off
” when [Return over IP] B
[Function] is set to “Disable”. A
Network Menu
139
Menu Display and Detailed Settings