User's Manual

9
Cellular
For configuring
whether to enable connection via a
USB cellular adapter.
[Setting Values: Enable, RDisable]
9
Server
For configuring
the server for uploading to the FTP
server.
[Setting Values: RClip-FTP1, Clip-FTP2, Clip-
FTP3, Clip-FTP4]
Clip Server
9
Clip-FTP1, Clip-FTP2, Clip-FTP3, Clip-
FTP4
* The name that is set in
[Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will appear on the [FTP
Upload] action screen of the thumbnail display.
*
Enter not more than 31 characters.
o
Protocol
For setting the protocol of the FTP server to be
connected.
0
FTP:
Protocol that
does not encrypt the incoming and
outgoing data.
0
SFTP:
Protocol that encrypts incoming and outgoing
data using SSH.
0
FTPS:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
0
FTPES:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
0
ZIXI:
Enables stable transmission by reducing jitter
and packet loss significantly through
communicating via a relay server.
[Setting Values: RFTP, SFTP, FTPS, FTPES,
ZIXI] A
[Setting Values: RFTP, SFTP, FTPS, FTPES] B
Memo :
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
If “ZIXI” is set, the resume function is enabled.
o
Server
For setting
the server name (“mystation.com”, etc.)
or the IP address (“192.168.0.1”, etc.) of the FTP
server.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o
Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
The default value varies with the protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21, ZIXI:
2088)
o
Dir. Path
Enter the path name for the directory to upload to
(“/pub”, “/home/user”, etc.)
*
Enter not more than 127 characters.
o
Username
Enter the user name for connecting to the FTP
server.
*
Enter not more than 31 characters.
o
Stream ID A
For configuring the stream ID that is registered at
the distribution destination.
The default value varies with the product model.
*
Enter not more than 63 characters.
Memo :
0
This item is selectable only when [Type] is set to
“ZIXI”.
o
Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters. Enter not
more than 127 characters for ZIXI setting.
o
PASV Mode
For
setting whether to set the communication mode
used for file transfer to the passive mode.
Set to
“On
” if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
0
When [Protocol
] is configured to “SFTP” or
“ZIXI”, this item appears as “---” and cannot be
selected.
Network Menu
143
Menu Display and Detailed Settings