User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
System Menu
This menu screen allows system-related settings.
For configuring recording settings, formatting and
restoration of
a recording media, tally lamp setting,
date/time, time zone and other settings.
It can also be used to reset the menu settings to
their default values.
Record Set...
For specifying recorded video-related settings.
(A P149 [Record Set Item] )
Media
9
Format Media
For formatting (initializing) a recording media.
Select a card slot, select [
Format] from [Cancel]/
[Format], and press the Set button (R) to format
(initialize) the card.
(A P51 [Formatting (Initializing) of Recording
Media] )
9
Restore Media
For restoring a recording media.
Select a card slot, and press the Set button (R) to
restore the recording media.
(A P52
[Repairing the Recording Media] )
Memo :
0
[! RESTORE]
appears in the remaining level
display area when a recording media that
requires repair is inserted. However, it is not
selectable when recording in Camera mode and
during Clip Review.
Setup File
This allows you to save the menu settings as well
as the performance results of shutter speed and
AWB.
It is useful to save settings according to different
shooting conditions.
9
Load File...
Loads the settings.
(A P174 [Loading a Setup File] )
9
Store File...
Saves the settings.
(A P173 [Saving Setup Files] )
9
Delete File...
Deletes the settings.
(A P
174 [Deleting Setup Files] )
Tally Lamp
For setting
whether to light up the tally lamp during
recording, when the remaining space warning is
displayed, or during live streaming.
Memo :
0
The blinking warning display, such as when the
remaining battery level is low, is enabled in a
setting other than “Off”.
0
Rec/Live Streaming:
Lights up during recording or live streaming.
0
Live Streaming:
Lights up during live streaming. Does not light
up during recording.
0
Rec:
Lights up during recording.
0
External:
Lights up when the camera recorder is
controlled by an external device such as RM-
LP100.
When external is selected, [PVW] is displayed
on the
LCD/VF screen during Preview Tally, and
[PGM] is displayed on the LCD/VF screen
during Program Tally.
0
Off:
Turns off the indicator.
[Setting Values: Rec/Live Streaming, Live
Streaming, RRec, External, Off]
System Menu
147
Menu Display and Detailed Settings