User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
NETWORK LED
When this is configured to “On”, it lights up in red
when live streaming is in progress.
The
LED lights up in orange during poor streaming
connection or connection failure.
[Setting Values: ROn, Off]
STATUS LED
For configuring the STATUS LED.
0
REC/Pre Rec:
Lights
up
in red during recording or transition to
recording. Lights up in orange when the
remaining space on the recording media is
running low. Lights up in green when Pre Rec is
on standby.
0
External:
Lights up in red while in the Program mode when
an external device such as RM-LP100 is
connected. Lights up in green while in the
Preview mode.
0
Return over IP:
Lights up in green during Return over IP or when
IFB is in progress. Lights up in orange when an
error has occurred.
0
Off:
Does not light up.
[Setting Values: RREC/Pre Rec, External, Return
over IP, Off]
LED Bright
For specifying the brightness of the NETWORK
LED and STATUS LED.
[Setting Values: High, Middle, Low]
GPS A L
For setting the GPS function to On or Off (power
on/off).
[Setting Values: On, ROff]
Memo :
0
When [A/V Set] B [Video Set]
B [SDI OUT1
Res.] is set to “1080p”, configuring [System] B
[GPS] to “On” changes the setting to “1080i”.
Language
Switches between languages in the menu screen.
[Setting Values: REnglish, Français, Español] (U
model)
[Setting Values: REnglish, Français, Deutsch,
Italiano, Español, Pусский, Türkçe] (E model)
Reset All
Resets all menu settings.
Memo :
0
[Date/Time] and [Time Zone
] cannot be reset.
(A P148 [ Date/Time ] )
(
A P149 [ Time Zone ] )
0
This item is not selectable when recording in
Camera mode, during Clip Review, during live
streaming and in Media mode.
Date/Time
For setting
the year, month, day, hour, and minute.
Memo :
0
The display
order of the date (year, month, day)
follows the setting in [Display Settings] B [Date
Style]. However, the 24-hour format is used for
the hour display regardless of the [Time Style]
setting.
(A P149
[ Time Style ] )
0
For setting the time acquired from the GPS
satellite by pressing the [FOCUS ASSIST/1]
button if radio wave reception from the GPS
satellite allows for setting of the date and time.
The
[USER1] button is grayed out if information
for setting the date and time cannot be acquired
from the GPS satellite. A L
Date Style
For setting the date display sequence for display
on the LCD monitor and viewfinder screen as well
as for time stamp recording.
Display examples of the setting values are as
follows.
0
DMY2: 30 Jun 2019
0
DMY1: 30-06-2019
0
MDY2: Jun 30, 2019
0
MDY1: 06-30-2019
0
YMD: 2019-06-30
[Setting Values: DMY2, DMY1, MDY1, MDY2,
YMD]
(Default values: MDY2 (U model), DMY1 (E
model))
148
System Menu
Menu Display and Detailed Settings