User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Display Screen in Camera
Mode
When the display setting for [
LCD/VF] B [Display
On/Off] is set to “Off”, the corresponding display is
hidden. However, the display may appear during
event display or warning display.
Memo :
0
When the display setting for [LCD/VF
] B
[Display On/Off] is set to “On”, the display screen
appears only in the following cases if it has been
turned off.
0
Approximately
3
seconds when changes are
being made
0
During event display or warning display
Display Screen
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
120/60fps
ITU709
COMPRESS
SB P
5 . 6 f t
B 5600
K
0
N
L
B
O
P
U
Y
D
E
F
C
G
A
KJ M
c
h
V
bi g
f
jk
d
X
W
a
e
R
S
Q
Z
T
I
H
A
Voltage/Battery Power
Displays the
current status of the power supply
in use.
(A P37 [Power Status Display] )
Memo :
0
Even when the display screen is turned off and
[LCD/VF] B [Display On/Off]
B [Battery] is set to
“Off”, this will be displayed when there is a
warning.
B
Remaining Space on Media
Displays the remaining recording time for the
recording media
in slot A and slot B separately.
W Y
G
: Currently selected slot. (White card)
W z : Write-protect switch of SD card is set.
W!INVALID : When a recording media
writing/reading error has
occurred, or when the
recording media is
irreparable.
W!FORMAT : Recording media requires
formatting.
W!RESTORE : Recording media requires
repair.
W
!INCORRECT
:
0
Recording media is not supported.
0
When an SD card lower than Class 10 is
inserted while in the XHQ mode.
W!REC INH :
0
When attempting to record more than 4
GB while an SD card that does not support
recording of more than 4 GB is inserted.
(A P154 [ 4GB File Spanning(SDXC) ] )
The following icons are displayed during FTP
upload.
(A P182 [Uploading a Recorded Video Clip] )
Icon Status
.
[Auto Upload] is configured to
“On” and in the standby state.
“A” is displayed at the top left
corner of the icon while in the
Auto FTP mode.
.
Auto FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated.
.
FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated. In this case,
instead of the remaining
recordable time on the
recording media, an estimated
value of the remaining transfer
time is displayed.
.
(Yellow)
Error has occurred during FTP
transfer.
Memo :
0
The displayed time is an estimate.
0
Even when the display screen is hidden and
[LCD/VF] B [Display On/Off] B [Media
Remain] is set to “Off
”, this will be displayed
when there is a warning.
C
Volume Operation Indicator
Displayed when
there are changes made to the
volume of the headphone(x) (0 to 15), the
values of LCD BRIGHT (E) or PEAKING (J)
(-10 to +10).
D
Operation lock
The r icon appears during operation lock.
Memo :
0
The s icon appears for 3 seconds after
operation lock is turned off.
Display Screen in Camera Mode
159
Display/Status Screen