User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
d
SDI/HDMI Record Trigger
STBY B : When [A/V Set]
B [Video Set] B
[SDI OUT] B [Rec Trigger] is set to
“Type-A” or “Type-B”, or [HDMI
OUT] B [Rec Trigger] is set to “On”
and recording is stopped
REC B : When [A/V Set] B [Video Set] B
[SDI OUT] B [Rec Trigger] is set to
“Type-A” or “Type-B”, or [HDMI
OUT] B [Rec Trigger] is set to “On”
and recording is in progress
e
GPS Mark A L
When [System] B [GPS] is set to “On”, the
signal reception status is displayed.
Memo :
0
The display changes according to the signal
reception sensitivity. If signals cannot be
received, the H mark appears in yellow
regardless of the
[
LCD/VF] B [Display On/Off]
B [GPS] setting.
0
This item is not displayed when
[
GPS] is set to
“Off”.
f
Media Status
---- :
A card is not detected in the
selected slot, and [Tally
Lamp] is configured to a setting
other than “External” or
[STATUS LED] is configured to
a setting other than “External”
STBY : Recording standby
RREC : Recording
REVIEW : Clip Review
(A P86 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY O : Pre Rec recording standby
(A P91 [Pre Rec] )
RRECO : Pre Rec recording
(A P91 [Pre Rec] )
STBY L : Clip Continuous Rec recording
standby
(A P92 [Clip Continuous Rec] )
RRECL : Clip Continuous Rec recording
(A P92 [Clip Continuous Rec] )
STBYL
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(A P92 [Clip Continuous Rec] )
STBY N : Interval Rec recording standby
(A P95 [Interval Rec] )
STBYN
(displayed in
red)
: Interval recording pause
RRECN : Interval Rec recording
(A P95 [Interval Rec] )
STBY M : Frame Rec recording standby
(A P94 [Frame Rec] )
RRECM : Frame Rec recording
(A P94 [Frame Rec] )
STBYM
(displayed in
yellow)
: Frame Rec recording pause
(A P94 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Q
: During clip cutter recording
(displayed for 3 seconds)
(A P96 [Splitting the Clips Freely (Clip Cutter
Trig)] )
PGM : Receiving program signals
from an external device, such
as a remote control unit
PVW : Receiving preview signals
from an external device, such
as a remote control unit
Display Screen in Camera Mode
163
Display/Status Screen