User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
![](/manual/jvc/gy-hc550u/user-s-manual-english-french-portuguese/images/img-209.png)
Return Video/Audio from
the Network (Return over
IP)
Return video/audio from the network can be
displayed on the viewfinder or LCD monitor of the
camera or listened through a headphone.
Memo :
0
This feature
is only usable in the Camera mode.
0
Start the encoder before activating Return over
IP. To end, turn off Return over IP before shutting
down the encoder.
0
This feature is available when [System] B
[Record Set] B [Record Format] B [System] is
set to “HD” or “SD”. When [WFrame Rate] is set
to “24p”, this feature is not available.
Configuring the Return over IP Server
Configure the Return over IP settings and establish
the connection before displaying the return video.
1
Register the [Return Server].
Configure [Network] B [
Return over IP]
B
[Server] to “Server”.
Configure the individual settings in the [Return
Server] item.
Memo :
0
For details
on the registered information, please
consult the network administrator for the server.
0
Configure “Icecast” to a setting other than
[Type].
Operates as IFB when the setting is configured
to “Icecast”.
Return Video and Audio from the
Network
1
Set the camera recorder to the Camera
mode.
(A P24
[Operation Modes] )
2
Assign the
“Return Video” and “Return
over IP”
features to any of the user buttons
(A P
46 [Assignment of Functions to User
Buttons] )
Memo :
0
The
“Return over IP” feature can also be
operated using
“On”/“Off” under [Network] B
[Return over IP] B [Return over IP].
3
When [WFormat] is configured to
“QuickTime (MPEG2)
”
or “MXF(MPEG2)”,
configure [Network] B [Return over IP] B
[Function] to “Enable”A
(A P
139 [ Function A
] )
4
Press the user button that is assigned with
the “Return over IP
”
function.
5
Press the user button that is assigned with
the “Return Video” function.
Displays the return video image.
The settings in [
A/V Set] B [Audio Set] B
[IFB/RET Monitor] will be applied to the audio.
(A P134 [ IFB/RET Monitor... ] )
210
Return Video/Audio from the Network (Return over IP)
Network