User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Memo :
0
To display only one image continuously, set
[Interval Time] to “0”.
0
When recording is performed together with live
streaming or when there is a lot of information
display on
the LCD/VF screen, images may take
more than 10 seconds to display. It is possible
to reduce the time taken to display by lowering
the resolution of the recording and live
streaming or by pressing the [DISPLAY] button
of the camera recorder to turn off the display
screen.
0
To use only the Full Screen Graphic function
without the overlay display, select [Overlay
Settings]
B [Type] and choose options other
than “None”. Then, set the [Overlay] button on
the web screen for controlling the overlay to Off.
0
When the format of the next image to be
displayed
is not supported during image display,
“Unsupported Graphic Format” will be displayed
on the camera recorder, and that image will not
be displayed. Import images that support a
displayable format.
(A P216 [Importing Images for Display to the
Camera] )
Protecting Overlay Settings with a
Password
You can use a password to protect overlay settings
to prevent
the cancellation of watermark display by
a third party.
Protecting with a Password
1
Set [Overlay Settings] B [
Password Lock
]
to “On”.
2
Enter the protection password and press
the cross-shaped button (I).
Enter not more than 16 characters for the
password using the software keyboard.
3
Enter the same password again and press
the cross-shaped button (I).
4
Press [Set].
A password request screen will appear
subsequently before you enter the [Overlay
Settings] screen.
Caution :
0
Do not
forget the password that you have set. If
the password is lost or forgotten, you cannot
deactivate the password protection function.
Memo :
0
When overlay settings are protected by a
password, the following items in [System] are
grayed out and cannot be selected.
0
[Reset All]
0
[Record Set]
B [Record Format]
0
[Setup File] B [Load File] B [Picture File]
/
[User File]/[All File]
0
[Setup File
]
B [Store File] B [Picture File]/
[User File]/[All File]
Deactivating Password Protection
1
Select [Overlay Settings].
A password request screen appears.
2
Enter the password and press the cross-
shaped button (I).
If the password matches the configured
password, the [Overlay Settings] menu
appears.
3
Change [Password Lock] to “Off”.
4
Press [Set] to close the deactivation
complete screen.
218
Broadcast Overlay A L
Overlay
A
L