INSTRUCTIONS

AGC Limit
For setting the maximum gain value of “AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
0
When
[LCD/VF] B [Display Type
] B [Gain] is set
to “dB”:
[Setting Values: 30 dB, 24 dB, R18 dB, 12 dB,
6 dB]
0
When [LCD/VF] B [Display
Type
] B [Gain] is set
to “ISO”:
[Setting Values: ISO 25600, ISO 12800, RISO
6400, ISO 3200, ISO 1600]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, RF2, Open]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F16, RF11, F8, F5.6]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT.BAL] switch.
[Setting Values: On, ROff]
Memo :
0
This function
is disabled when AGC is operating.
9
Gain
For configuring the speed at which gain changes
when [Smooth Trans] is set to
“On
”.
[Setting Values: Fast, R, Middle, Slow, Off]
9
Shutter
For configuring the speed at which the shutter
changes when [Smooth Trans] is set to
“On
”.
[Setting Values: Fast, R, Middle, Slow, Off]
9
White Balance
For configuring the speed at which white balance
changes when [Smooth Trans] is set to
“On
”.
[Setting Values: Fast, R, Middle, Slow, Off]
FAW
For setting
the position in the white balance switch
[WHT.BAL] to assign the FAW (Full Auto White
Balance) function.
[Setting Values: B, A, PRST, RNone]
FAW Speed
For configuring the operation speed of FAW (Full-
time Auto White Balance)
[Setting Values: RFast, Middle, Slow]
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
The setting
is fixed at “AGC” in the Full Auto mode.
In addition, the sensitivity setting in [Lolux] is used.
(A P113 [ Lolux ] )
0
When [LCD/VF] B [Display
Type
] B [Gain] is set
to “dB”:
[Setting Values: AGC, 30 dB, 27 dB, 24 dB, 21
dB, 18 dB, 15 dB, 12 dB, 9 dB, 6 dB, 3 dB, 0 dB,
-3 dB, -6 dB]
(Default values for GAIN L: 0dB, GAIN M: 6dB,
GAIN H: 12dB)
0
When [
LCD/VF]
B [Display Type] B [Gain] is set
to “ISO” and [Camera Process] B [Color
Space] is set to a value other than “HLG”:
[Setting Values: AGC, ISO25600, ISO20000,
ISO16000, ISO12800, ISO10000, ISO8000,
ISO6400, ISO5000, ISO4000, ISO3200,
ISO2500, ISO2000, ISO1600, ISO1250,
ISO1000, ISO800, ISO640, ISO500, ISO400]
(Default values for GAIN L: ISO800, GAIN M:
ISO1600, GAIN H: ISO3200)
Memo :
0
“AGC” cannot be selected when “J-Log1”
or
“HLG”
is selected for [Camera Process] B [Color
Space].
0
When “J-Log1” is selected for [Camera
Process] B [
Color Space
], the base ISO speed
for achieving the 800% dynamic range of [J-
Log1] is “[ISO1000]”. The square brackets
appear only in the case of the base ISO.
110
Camera Function Menu
Menu Display and Detailed Settings