INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Gain
For setting the gain display to be displayed on the
LCD monitor and viewfinder screen.
0
ISO:
Displays the gain as ISO sensitivity.
0
dB:
Displays the gain in dB (decibel).
[Setting Values: ISO, RdB]
Memo :
0
This item cannot be configured when [
Color
Space] is set to “HLG”.
Audio Meter
For specifying whether to display the audio level
meter on the LCD monitor and viewfinder screen.
0
Auto:
Displays the audio meter for 4 channels when
[System]
B [Record Set] B [Record Format] B
[WAudio] is set to “4CH” and for 2 channels
([CH1]/[CH2]) in all other cases. Whether 4
channels or 2 channels ([CH1]/[CH2]) are
displayed during playback is dependent on the
recorded clip.
0
CH1/2:
Displays the audio level meter for
[CH1] and
[CH2
].
[Setting Values: RAuto, CH1/2]
Display On/Off Item
For setting whether to turn on or off the display of
an item
on the LCD monitor and viewfinder screen.
Battery, Clip Info, OK Mark, High-Speed
2, SDI IN, Check Mark, Media Status,
Rec Trigger, TC/UB, Media Remain, Record
Format, Video Format, Guide, GPS u
v, Return over IP 0, Live Streaming,
Network,
Date,
Time, Operation Lock, Zoom,
Focus, Zebra, Focus Assist, Color Space,
Black Toe, Skin Detail, ND Filter, AE Level,
Iris, Shutter, Gain, White Balance, Audio
Meter, Position Bar
For configuring whether to display or hide an item.
[Setting Values: ROn, Off]
Memo :
0
This may not be selectable depending on the
operating mode and status.
130
LCD/VF Menu
Menu Display and Detailed Settings