INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Slot Mode
For setting the operation of the card slot.
0
Series:
Mode that activates slots A and B sequentially.
0
Dual:
Mode that activates slots A and B
simultaneously.
(A P86 [Dual Rec] )
0
Backup0
: Mode that enables recording to
slot B without using the [REC] button. This item
is selectable only when [Rec Mode] is set to
“Normal”. Record, start and stop operations can
be controlled from the [Backup Rec] menu or
using the user button that is assigned with
“Backup Trig”.
(A P
88 [Backup Rec 0] )
[Setting Values:
RSeries, Dual, Backup0]
Memo :
0
When this is configured to “Series” and
recordable
media is inserted into slot A or slot B
or both the slots, pressing the [REC] button
starts recording only to the card in the selected
slot (active slot).
0
When
this
is configured to “Dual” and recordable
media are inserted into both slots A and B,
pressing the [REC] button starts simultaneous
recording to the cards in both slots.
0
When [System] is configured to “HD
+Web”2, “---” is displayed.
9
Backup Rec 0
For starting/stopping
backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to “Backup”.
Memo :
0
When recording
is stopped due to no remaining
space on the media, etc., this item is fixed at
“STOP” and cannot be selected.
4GB File Spanning(SDXC)
A recording
file is automatically split when the size
exceeds 4 GB, but if an SDXC card is used, you
can record clips larger than 4 GB by setting this
option to “Off”. (Up to a maximum of 64 GB or 4
hours)
0
On:
Splits a
file when it exceeds 4 GB or 30 minutes.
0
Off:
Splits a file when it exceeds 64 GB or 4 hours.
[Setting Values: ROn, Off]
Memo :
0
This option is only valid if the SD card used for
recording is of the SDXC format.
0
During simultaneous recording, such as Dual
Rec and backup recording0, this option is
valid only when the SD cards in slots A and B
are of the SDXC format.
LPCM (QuickTime)
For setting the audio recording format of
QuickTime.
[Setting Values: Dual Mono, RStereo]
System Menu
155
Menu Display and Detailed Settings