INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Assignment of Functions
to User Buttons
You can assign functions to the following buttons
and use them as user buttons.
By assigning
functions to the buttons, the usability
of the camera recorder can be enhanced.
Perform settings in the menu items corresponding
to each button.
Button Menu Item
[USER0] Switch [USER0]
[USER1] Button [USER1]
[USER2] Switch [USER2]
[USER3] Button [USER3]
[USER4] Button [USER4]
[ONLINE/5] Button [USER5]
[USER6] Button [USER6]
[USER7] Button [USER7]
[AWB/USER8] Switch [USER8]
[J] Button [USER9 ▲]
[K] Button [USER10 ▼]
[H] Button [USER11 ◀]
[I] Button [USER12 ▶]
[SET/USER13] Button [USER13 ●(Front)]
[USER1] Button (VF) [USER1 (VF)]
[USER2] Button (VF) [USER2 (VF)]
[RET] Button on the
Lens
[LENS RET]
.
1
Assign functions to the buttons from the
menu.
Configure each item to the user buttons in
[Camera Function] B [User Switch Set].
(A P111 [User Switch Set Item] )
Memo :
0
Operations of the user buttons are interlocked
with the menu settings.
0
When the menu screen is displayed, these
buttons function
as the menu operation buttons.
(A P105 [Basic Operations in Menu Screen] )
Assignment of Functions to User Buttons
45
Preparations