INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Selecting a Video Format
0
The selectable
[Frame Rate]/[Bit Rate] changes
according to the settings of [System]/[Format]/
[Resolution].
List of Formats
The following is a list of file formats and video
formats that can be selected on this camera
recorder.
o
When [
System
] is configured to “HD”, “HD
+Web”, 2 or “HD(SDI In)”, the options for
slot A are:
Record Format
W
Format
W
Resolution
W
Frame
Rate
W
Bit Rate
W
Audio
QuickTime
(MPEG2),
MXF
(MPEG2)
1920x1080 60i, 50i,
30p*,
25p*
35M (HQ) 4CH 16 bit/
2CH 16 bit
1440x1080 60i, 50i 35M (HQ),
25M (SP)
1280x720 60p, 50p 35M (HQ)
QuickTime
(H.264)
1920x1080 60p, 50p
70M (XHQ),
50M (XHQ)
4CH 24 bit/
2CH 24 bit
50M (XHQ) 4CH 16 bit/
2CH 16 bit
60i, 50i,
30p*,
25p*,
24p*
50M (XHQ)
4CH 24 bit/
2CH 24 bit
50M (XHQ),
35M (UHQ)
4CH 16 bit/
2CH 16 bit
1280x720 60p, 50p
50M (XHQ)
4CH 24 bit/
2CH 24 bit
35M (UHQ) 4CH 16 bit/
2CH 16 bit
Exchange
(U model)
1920x1080 60p 12M (LP) 2CH
1280x720 8M (LP)
MP4
(H.264)
(E model)
1920x1080 50p 12M (LP) 2CH
1280x720 8M (LP)
* Not selectable when configuring “HD(SDI In)”.
Memo :
0
When [System] is set to “HD” or “HD(SDI In)”,
each item for slot B is fixed at the same setting
as slot A.
0
When “HD+Web”[System]
is set to 2,
[Format] is fixed at “QuickTime(H.264)”.
0
When
[
WFormat] is configured to “Exchange” or
“MP4(H.264)”, selection is possible only when
[System] is configured to “HD” or “HD(SDI In)”.
0
The following functions cannot be used when
HD+Web is selected.
View Remote, Live Streaming, Return over IP
o
When [System] is set to
“High-Speed”
2
Record Format
W
Format
W
Resolution
W
Frame
Rate
W
Bit Rate
W
Audio
QuickTime
(H.264)
1920x1080 120/60p,
100/50p
70M (XHQ),
50M (XHQ)
2CH 24 bit
50M (XHQ) 2CH 16 bit
120/30p,
100/25p,
120/24p
50M (XHQ)
2CH 24 bit
50M (XHQ),
35M (UHQ)
2CH 16 bit
Caution :
0
When [System] B [Record Set]
B [Record
Format] B [System] is configured to “High-
Speed”2, network cannot be used via
wireless LAN u v or the [HOST] terminal
(USB). Configure as follows in this case.
0
Set
[Network]
B [Connection Setup] B [USB/
Int. WLAN] to “Off”. u v
0
Unplug the USB network adapter
Note that camera operation will come to an
emergency
stop
and the power will turn off if the
above steps are not performed.
File data may be damaged if this happens while
recording is in progress.
Memo :
0
The [Rec Mode] is fixed at “Normal”.
0
The following functions cannot be used when
High-Speed is selected.
View Remote, Live Streaming, Return over IP,
Upload of recorded clip, time stamp recording
and Pixel Mapping
0
The settings for slot B are fixed at the same as
slot A.
0
When the [
TC GEN]
] selection switch is set to
“F-RUN”, the time code will be recorded in “R-
RUN”.
0
[TC/UB...
]
B [TC Mode] is fixed at “SW Set”.
0
It is not possible to set a shutter speed that is
slower than the frame rate.
(Example: When 120/60p is selected, 1/120 to
1/9873 can be set.)
0
The sensitivity of high speed shooting is lower
than normal shooting. In order to capture more
beautiful images, it is recommended to perform
shooting in a lighted environment.
0
The remaining space on the media (recordable
time to
the recording media) runs out faster than
usual.
(Example: For 120/60p, as the recording speed
is twice as fast as usual, the remaining space on
the media is reduced by approximately double
the speed.)
56
Selecting System Definition, File Format and Video Format
Shooting