INSTRUCTIONS

Setting Zebra Pattern
When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
1
Set the zebra display pattern.
Select the display pattern in [LCD/VF] B
[Shooting Assist] B [Zebra].
(A P
126 [ Zebra ] )
.
Zebra 2 Display
Example
Zebra 1 Display
Example
2
Specify the brightness (luminance) level
range for displaying zebra pattern.
Set the maximum brightness limit in [LCD/VF]
B [Shooting Assist] B [Zebra] B [Top 1]/[Top
2],
and
the minimum brightness limit in [Bottom
1]/[Bottom 2].
Item Settings Options
Top 1 Maximum
brightness limit for
displaying Zebra 1
5%, 10% to 95%,
98%, 100%, Over
Bottom 1 Minimum
brightness limit for
displaying Zebra 1
0%, 5% to 95%,
98%, 100%
Top 2 Maximum
brightness limit for
displaying Zebra 2
5%, 10% to 95%,
98%, 100%, Over
Bottom 2 Minimum
brightness limit for
displaying Zebra 2
0%, 5% to 95%,
98%, 100%
Memo :
0
When [Zebra] is set to “1 Pattern”, “Top 2
” and
“Bottom 2” cannot be selected.
0
If the area specified by two zebra patterns
overlaps, Zebra1 pattern will be displayed.
0
The timing to detect the zebra pattern display
can
be
configured only when “J-Log1” or “HLG”
is selected in [Color Space] and “Cam” or “Cam
+ Return” is selected in [Convert to ITU709].
(A P
116 [ Color Space ] )
(
A P126 [ Detect ] )
3
Display the zebra pattern.
0
When
the
viewfinder is connected, the zebra
pattern is displayed when the [ZEBRA]
switch is set to “ON” or push down to
“MOMENT”.
0
When the viewfinder is not connected, the
zebra pattern is displayed using the user
button assigned with “Zebra”.
.
During zebra pattern display, (zebra icon)
is displayed on the display screen in Camera
mode.
Memo :
0
When the viewfinder is connected, priority is
given to the [ZEBRA] switch on the viewfinder
so
the
user button assigned with “Zebra” will not
function.
80
Setting Zebra Pattern
Shooting