User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Skin Area
For configuring whether to display only the color
correction area in color and areas that are not
corrected in black-and-white.
0
On:
When “Detect” of [Skin Color Adjust] is
functioning,
only the detected color is displayed
in color and the other areas are displayed in
black-and-white in the following cases.
0
LCD monitor and viewfinder video images
0
[HD/SD SDI OUT2] terminal output when
[A/V Set]
B [SDI OUT2] is set to “VF”
0
[
HDMI] terminal output when [A/V Set]
B
[HDMI OUT] is set to “VF”
0
Off:
Displays all the colors.
[Setting Values: On, ROff]
Skin Color Adjust
For configuring details of the skin color.
0
Detect
For detecting the skin tone.
[USER1]Stop appears when detection is in
progress and
[USER1]Execute appears while
detection is stopped.
[Setting Values: Execute, Stop]
0
Saturation
Selecting a larger value widens the saturation
range of the color to be corrected, while a
smaller value reduces the color saturation
range.
[Setting Values: +10 to R0 to -10]
0
Width
Although selecting a larger value widens the hue
range of the color to be corrected and eases
identification, it also increases the likelihood of
erroneous correction. Selecting a smaller value
narrows down the hue range, but helps to
reduce erroneous correction at the same time.
[Setting Values: +10 to R0 to -10]
White Balance Item
Preset Temp.
For setting the color temperature when the
[WHT.BAL] switch is set to
“PRST”.
For
details, refer to “[Adjusting the White Balance]
(A P 63)”.
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT.BAL] switch is set to “PRST”,
pressing the user button assigned with the “AWB”
function each time switches the color temperature
setting in the Preset mode. (
[Preset
Temp.]1[Alternative Temp.])
For details, refer to “[Adjusting the White Balance]
(A P 63)”.
Preset Paint Memory
For configuring whether to configure the color
temperature individually or collectively in the
Preset mode. Adjustment is performed in [Preset
Paint
].
0
Individual:
Each of the 9 types of color temperatures
(2300K, 3000K, 3200K, 4200K, 4800K, 5200K,
5600K, 6500K, 7500K) are configured
individually.
0
Common:
The
entire
color temperature range is configured
collectively.
[Setting Values: Individual, RCommon]
Preset Paint
For adjusting
the R (red) and (B) blue components
in the Preset mode.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: +32 to -32 (R 0)]
122
Camera Process Menu
Menu Display and Detailed Settings