User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
SDI OUT2
For configuring video output from the [HD/SD SDI
OUT2] terminal.
0
VF:
Outputs the same display as that of the
viewfinder at 1080p.
0
Camera:
Outputs
from
the terminal. The screen and menu
displays can be configured in [SDI OUT2 Char.].
0
Off:
Does not output from the terminal.
[Setting Values: VF, Camera, ROff]
Memo :
0
When a resolution with no SDI output is
selected, “Camera” cannot be selected.
0
When “576p(HDMI only)” or “480p(HDMI
only)” is selected for [SDI OUT2/HDMI Res.]
while “Camera” is being selected, the setting
switches from “Camera” to “Off”.
HDMI OUT
For configuring video output from the [HDMI]
terminal.
0
VF:
Outputs the same display as that of the
viewfinder at 1080p.
0
Camera:
Outputs from
the terminal. The screen and menu
displays can be configured in [HDMI Char.].
0
Off:
Does not output from the terminal.
[Setting Values: VF, Camera, ROff]
Memo :
0
When a resolution with no HDMI output is
selected, “Camera” cannot be selected.
VIDEO OUT
For configuring video output from the [VIDEO
OUT] terminal.
[Setting Values: On,
ROff]
HDMI Color
For setting the color format of HDMI signals.
[Setting Values: RGB, RAuto]
Memo :
0
This item can be configured when [HDMI OUT]
is set to a setting other than
“Off”.
HDMI Colorimetry
For configuring the colorimetry of the HDMI signal
when [Camera Process]
B [Color Space] B
[Colorimetry] is set to “ITU2020”.
0
ITU2020:
Outputs using the colorimetry of ITU2020
regardless of the device that is connected via
HDMI.
0
ITU709:
Outputs using the colorimetry of ITU709
regardless of the device that is connected via
HDMI.
0
Auto:
Switches the colorimetry automatically
according to the device that is connected via
HDMI.
[Setting Values: ITU2020, ITU709, RAuto]
Memo :
0
This item can be configured when [HDMI OUT]
is set to a setting other than
“Off”.
0
This item can be configured when
[HDMI
Color
] is set to “Auto”.
0
This item cannot be configured when [Camera
Process] B [Color Space
]
B [Colorimetry] is set
to a setting other than “ITU2020”.
132
A/V Set Menu
Menu Display and Detailed Settings