User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Preparing Network
Connection
Operating Environment
Operation has been verified for the following
environments.
Computer
0
OS: Windows 7
Web browser: Internet Explorer 11
0
OS: Windows 10
Web browser: Chrome
0
OS: macOS 10.13
Web browser: Safari 10
Smartphone/Tablet Terminal
0
OS: iOS11 (iPhone X/iPad Pro)
Web browser: Safari 11
0
OS: Android 6 (Smartphone)
Web browser: Chrome
0
OS: Android 7 (Tablet)
Web browser: Chrome
Camera Setup for Network Connection
1
Connect using the corresponding method
of connection
0
[
LAN] Terminal
Connect
a PC to this camera recorder directly
using a
cross-over cable or via devices such
as an Ethernet hub using a LAN cable.
(A P186 [Connecting to Network via [LAN]
Terminal 0] )
0
Built-in Wireless LAN u v
Attach the wireless LAN antenna if it is not
mounted.
(A P32 [Attaching the Wireless LAN Antennas
(Supplied)
u v] )
(A P188 [Connecting to Network via Built-in
Wireless LAN u v 0] )
0
Connect the following adapters to the
[HOST
] terminal (USB)
0
Wireless LAN adapter
0
Ethernet adapter
0
Cellular adapter
(A P187 [Connecting to Network via
[HOST] Terminal (USB) 0
] )
Memo :
0
Only a network connection adapter can be
connected to the [HOST] terminal (USB).
0
Connect or
disconnect an adapter only after you
have turned off the power of the camera
recorder.
0
You can find the latest information on the
compatible adapters at the product page of our
website.
0
Two types of network coverage (WAN and LAN)
are available for each application.
Caution :
0
When [System] B [Record Set]
B [Record
Format] B [System] is configured to “High-
Speed”2, network cannot be used via
wireless LAN u v or the [HOST] terminal
(USB). Configure as follows in this case.
0
Set
[Network]
B [Connection Setup] B [USB/
Int. WLAN] to “Off”. u v
0
Unplug the USB network adapter
Note that camera operation will come to an
emergency
stop
and the power will turn off if the
above steps are not performed.
File data may be damaged if this happens while
recording is in progress.
Connecting to Network via [LAN]
Terminal 0
You can connect a device such as a smartphone,
tablet terminal, or PC directly to the camera
recorder using a cross cable to access the camera
recorder’s web functions. Alternatively, you can
also connect using an Ethernet hub.
1
Configure the connection settings with
[Wizard
].
0
Select “LAN” in [Network]
B [Connection
Setup] B [Wizard], and configure the settings
according to the instructions on the screen.
Perform setting for the following.
0
IP address setting (DHCP or manual)
0
IP Address
0
Subnet mask
0
Default gateway
0
DNS Server
Memo :
0
When an
address is manually assigned in a NAT
environment, it is also necessary to set the
default gateway correctly besides conversion of
the address at the router’s end in order to
perform operations such as access to the
Internet from an external network via the router.
2
Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
Memo :
0
After setting
is complete, the following items will
be automatically configured.
0
The [Network] B [Connection Setup] B
[Default Gateway] setting changes to “LAN”.
0
The [Network] B [
Live Streaming
] B
[Interface] setting changes to “LAN”.
186
Preparing Network Connection
Connecting to the Network