User's Manual

Power Status Display
Viewfinder Screen and LCD Monitor
The power status is displayed on the display and
menu screens.
Display Description
B 14.4V
B 100min
C 30%
4 RES
Currently powered by a battery.
When the battery power runs out,
the battery mark appears hollow,
and “RES” (yellow) is displayed.
Memo :
0
You can set the display using
[LCD/VF] B [Display Type]
B
[Battery].
(A
P129 [ Battery ] )
G
Currently powered by DC power.
H
A warning display when the supply
voltage of the DC power is low.
Memo :
0
The battery
mark that indicates the battery level
may not appear depending on the battery in use.
0
When the battery that is connected does not
support communication, the voltage is
displayed regardless of the setting.
Display Screen
(A P161 [Display Screen in Camera Mode] )
(
A P167 [Display Screen in Media Mode] )
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00:00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
Menu Screen
(A P106 [Display and Description of the Menu
Screen] )
.
Display Settings
Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and
warning tone.
0
The front and back tally lamps of the camera
recorder appear blinking.
0
The warning tone is output from the speaker or
[PHONE] terminal.
Adjust the volume level using the [ALARM]
volume adjustment knob.
Memo :
0
If you
continue to use the camera recorder while
the power warning is displayed, the camera
recorder will stop automatically when the battery
or supplied voltage from the DC power becomes
lower.
Caution :
0
The remaining battery power and time are
displayed as they are from the battery
information.
Accurate
data may not be displayed
depending on the battery condition. Replace the
battery as soon as possible when the remaining
battery power and time are low.
36
Power Status Display
Preparations