INSTRUCTIONS

9
Level
The amount of correction can be specified
separately when [Gamma
] is set to “Standard”,
“Cinema 1” or “Cinema 2”.
When [Gamma] is set to “Standard”
[Setting Values: 0.35 to R 0.45 to 0.55 (in steps of
0.01)]
0
Increase the number:
Finer gradation at bright areas and coarser
gradation at dark areas.
0
Decrease the number:
Finer gradation at dark areas and coarser
gradation at bright areas.
When [Gamma] is
set
to “Cinema 1” or “Cinema 2”
[Setting Values: +10 to R 0 to -10]
0
Increase the number:
Finer gradation at dark areas and coarser
gradation at bright areas.
0
Decrease the number:
Finer gradation at bright areas and coarser
gradation at dark areas.
Memo :
0
When [Gamma] is set to “Standard” with the
value set at
[0.45], the gamma adjusted
conforms to ITU709 or ITU2020.
0
If
[Gamma
] is set to “Cinema 2”, the maximum
peak signal decreases from 109% as the
number becomes smaller in the setting values
from 0 to -10. When the level is at -10, the video
input with a dynamic range of 600% will be kept
within a 100% output.
0
The level cannot be configured when [
Gamma]
is set to “Off” or [Color Space] is set to “HLG” or
“J-Log1”.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: +20 to -20, Off] (Default Value: -6
for “J-Log1” and “HLG” of Color Space; 0 for all
other settings)
Memo :
0
The setting
values of this item and [Adjust...] are
stored separately when [Color Space] is set to
“HLG” or “J-Log1”.
9
Adjust...
For specifying the detailed settings of the contour
(detail).
(A P
121 [Detail/Adjust Item] )
Memo :
0
This item
cannot be selected when [Detail] is set
to “Off”.
Master Black
For adjusting
the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: +50 to +1, R0, -1 to -50]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1”.
0
The
setting
value of this item is stored separately
when [Color Space] is set to “HLG”.
Black Paint
For
adjusting
the R (red) and B (blue) components
of black.
[Setting Values: +50 to +1, R0, -1 to -50]
Memo :
0
This item cannot be configured when [Color
Space
] is set to “J-Log1” or “HLG”.
Flare
Performs flare correction.
[Setting Values: ROn, Off]
9
Master Flare
Performs correction to prevent the entire image
from turning white due to light that enters the lens.
The image
appears blacker with a larger value, and
whiter with a smaller value.
[Setting Values: +20 to +1, (R0), -1 to -20]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1” or “HLG”.
9
Flare Balance
For adjusting the balance between R (red) and B
(blue).
[Setting Values: +10 to +1, (R0), -1 to -10] (R/B)
V. Shading
For adjusting shading (color shift) in the vertical
direction which occurs due to the lens
characteristics.
0
On:
For adjusting shading.
0
Off:
Fixes shading adjustment. Manual adjustment
is not allowed.
[Setting Values: On, ROff]
9
Adjust
Performs vertical shading adjustment when [V.
Shading] is set to “On”.
[Setting Values: -128 to R 0 to +127]
(A P67 [Vertical Shading Adjustment] )
Camera Process Menu
117
Menu Display and Detailed Settings