INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P131 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P135 [Audio Set Item] )
Video Set Item
SDI OUT2 Char.
For configuring whether to show the display and
menu on the [HD/SD SDI OUT2]
terminal.
[Setting Values: On, ROff]
Memo :
0
When “VF” is selected for [SDI OUT2], the
setting is fixed at “On”.
HDMI Char.
For configuring whether to show the display and
menu on the [HDMI] terminal.
[Setting Values: On, ROff]
Memo :
0
When “VF” is selected for [HDMI OUT], the
setting is fixed at “On”.
Video OUT Char.
For configuring whether to show the display and
menu on the [VIDEO OUT]
terminal.
[Setting Values: On, ROff]
SDI OUT1 Res.
For selecting
the resolution of video output from the
[HD/SD SDI OUT1] terminal according to the
monitor to be connected.
[Setting Values: 1080psF, 1080p, R1080i, 720p,
576i, 480i]
Memo :
0
The selectable options vary according to the
setting in [System]/[WResolution] and [WFrame
Rate] of [System] B[Record Set] B [Record
Format].
0
Cross conversion output is not possible.
0
When [
A/V Set] B [Video Set] B [SDI OUT1
Res.] is set to “1080p”, configuring [System] B
[GPS] to “On” changes the setting to “1080i”.
u v
SDI OUT2/HDMI Res.
For configuring the resolution of the video output
from the [HD/SD SDI OUT2
] and [HDMI] terminals
according to the monitor to be connected.
[Setting Values: 1080psF/i, 1080p, R1080i, 720p,
576p(HDMI only), 576i, 480p(HDMI only), 480i]
Memo :
0
The selectable options vary according to the
setting in
[System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
0
When “VF
”
is selected for [SDI OUT2], signal is
output from the [HD/SD SDI OUT 2] terminal at
1080p.
0
When “VF
”
is selected for [HDMI OUT], signal is
output from the [HDMI] terminal at 1080p.
SDI OUT1
For configuring video output from the [HD/SD SDI
OUT1] terminal.
[Setting Values: On,
ROff]
Memo :
0
When a resolution with no SDI output is
selected, the setting is fixed at “Off”.
0
This item needs to be configured to “On” even
during
SDI OUT1 output from the expansion unit
terminal (68-pin) at the back.
A/V Set Menu
131
Menu Display and Detailed Settings