INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
9
W Bit Rate
For selecting the bit rate to be recorded to the SD
card in slot A.
The available
options vary according to the settings
for [System], [WResolution], and [WFormat].
0
When [System] is set to “HD” or “HD(SDI In)”,
[
WFormat] is set to “QuickTime(MPEG2)” or
“MXF(MPEG2)”0, and [WResolution] is
set to “1440x1080”:
[Setting Values: 35M (HQ), 25M (SP)]
* When
[WResolution] is set to a setting other than
“1440x1080”, it is fixed at “35M (HQ)”.
0
When [System] is set to “HD”, “HD(SDI In)” or
“HD+Web”
2 and [WFormat] is set to
“QuickTime(H.264)”:
0
When [WResolution] is set to
“1920x1080”,
and [WFrame Rate] is set to “60p” or “50p”:
[Setting Values:
70M (XHQ)0,
50M (XHQ), 35M (UHQ)]
0
When [WResolution] is set to “1920x1080
”,
and [WFrame Rate] to “60i”/“50i”/“30p”/“25p”/
“24p”2:
[Setting Values:
50M (XHQ), 50M
(XHQ), 35M (UHQ)]
0
When [WResolution] is set to “1280x720”:
[Setting Values: 50M (XHQ), 35M
(UHQ)]
0
When [System]
is set to “HD” or “HD(SDI In)” and
[WFormat] is set to “Exchange”0 or
“MP4(H.264)”0:
0
When [WResolution] is set to
“1920x1080”:
Fixed at “12M(LP)”.
0
When [WResolution] is set to “1280x720
”:
Fixed at “8M(LP)
”.
0
When
[System]
is set to “SD”2 or “SD(SDI
In)”2:
Fixed at 8M (HQ).
0
When [System] is set to
“High-Speed”
2:
0
When [WFrame Rate] is set to “120/60p
” or
“100/50p”
[Setting Values:
70M (XHQ),
50M (XHQ), 50M (UHQ)]
0
When [WFrame Rate] is configured to a
setting other than “120/60p” and “100/50p”
[Setting Values: 50M (XHQ), 50M
(XHQ), 35M (UHQ)]
Memo :
0
When [System] is configured to “HD(SDI In)”,
“30p”/“25p”/“24p”2 under [WFrame Rate]
cannot be selected.
9
W Audio
For selecting
the audio to be recorded to slot A (2ch
or 4ch). The selectable options vary according to
the settings in [WFormat] or [WBit Rate].
0
When [W
Bit Rate] is configured to a setting other
than “
70M (XHQ)”0 and
“ 50M (XHQ)”:
[Setting Values: R4CH 16 bit, 2CH 16 bit]
0
When [WBit Rate] is set to “ 70M
(XHQ)”0 or “ 50M (XHQ)”:
[Setting Values: R4CH 24 bit, 2CH 24 bit]
Memo :
0
When [WFormat] is configured to
“Exchange”
0 (U model) or
“MP4(H.264)”0 (E model), the setting is
fixed at “2CH”.
0
When [System] is configured to “High-
Speed”2, the setting is fixed at
“2CH”.
9
Y Format
For selecting
the format of the file to be recorded to
the SD card in slot B when [System] is configured
to “HD+Web”2.
This is fixed at QuickTime (H.264).
Memo :
0
When [System] is set to other than “HD
+Web”2, this item is fixed at the same
setting as [WFormat].
9
Y Resolution
For selecting the size of the image to be recorded
to
the
SD card in slot B when [System] is configured
to “HD+Web”2. (Horizontal x vertical)
0
When [System] is set to “HD+Web
”
2:
0
When [WFrame Rate] is configured to “60p”/
“60i
”/“30p”
[Setting Values: 960x540, 720x480,
480x270]
0
When [WFrame Rate] is configured to “50p”/
“50i”/“25p”
[Setting Values: 960x540, 720x576,
480x270]
0
When [WFrame Rate] is configured to “24p”
[Setting Values: 960x540, 480x270]
Memo :
0
When [System] is set to other than “HD
+Web”2, this item is fixed at the same
setting as [WResolution].
System Menu
153
Menu Display and Detailed Settings