INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
5
Adjust the brightness, outline and contrast
of the viewfinder screen.
Adjusting the Brightness
Use the [BRIGHT] knob to adjust the brightness
of the viewfinder.
Adjusting the Outline
Use
the [PEAKING] knob
to adjust the outline of
the viewfinder.
Adjusting the Contrast
Use the [CONTRAST] knob to adjust the
contrast of the viewfinder.
Adjusting the Color
Use the [CHROMA] knob to adjust the color of
the viewfinder.
Configuring the Luminance
Use the [B.LIGHT] switch to configure the
luminance level.
H: Bright; N: Normal; L: Dark
Adjusting the VF RGB gain
Use [LCD/VF
]
B [VF RGB Gain] to adjust the R/
G/B gain level of the viewfinder.
(A P126 [ VF RGB Gain ] )
Displaying in Black and White
The display can be switched to black-and-white
by configuring [LCD/VF]
B [VF Color] to “Off”.
(A P125 [ VF Color ] )
o
Flipping up the Eyepiece
Flipping
up
the eyepiece provides a better view
of the entire image.
Push the lock upward to flip up the eyepiece.
.
Lock
o
Flipping up the VF Barrel
Flipping up the viewfinder barrel enables
viewing of
the image directly. The image will be
inverted in this case. Press the [MIRROR]
switch to display the image correctly.
Push the lock upward to flip up the viewfinder
barrel.
.
Lock
Adjusting the LCD Monitor and Viewfinder
43
Preparations