INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Operation Lock Feature
You can use this feature to prevent erroneous
camera operation.
.
1
While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL/RESET
] button for 5 seconds
or longer.
0
The operation
lock turns on, and an operation
lock icon (r) appears on the display
screen.
0
Press the [CANCEL/RESET] button again for
5 seconds or longer to turn off the operation
lock.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P20 [Operation Modes] )
0
The power turns off and the operation lock is
disengaged.
0
The following remote operations are possible
even when the operation lock feature is turned
on (“On”).
0
Operation from
the remote control unit that is
connected to the [REMOTE] terminal.
0
Remote operation of the camera through
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[POWER ON/OFF]
switch
0
[ND FILTER
] switch
0
[MONI SELECT]
switch
0
[CH SELECT] switch
0
[AUDIO INPUT CH1/2/3/4] recording level
adjustment knob
0
[AUDIO SELECT CH1/2/3/4]-[
MANUAL/
AUTO] selection switch
0
[AUDIO SELECT CH1/2/3/4
]-[FRONT/REAR/
WIRELESS] selection switch
0
[TC PRESET
] button
0
[TC GEN]
time code generator switch
0
[MONITOR] volume adjustment knob
0
[ALARM] volume adjustment knob
0
[REC] button
0
User button assigned with the [Rec
] function
0
All switches on the lens
0
While the viewfinder is connected
0
[PEAKING][BRIGHT][CONTRAST
]
[CHROMA] Knob
0
[MIRROR]
[TALLY
] Switch
Operation Lock Feature
53
Preparations