User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
0
When [LCD/VF]
B [Display Type] B [Gain] is set
to “dB”:
[Setting Values: 42 dB, R36 dB, 30 dB, 24 dB]
0
When [LCD/VF] B [Display
Type
] B [Gain] is set
to “ISO”:
[Setting Values: ISO 102400, RISO 51200, ISO
25600, ISO 12800]
Clip Review
For configuring the behavior when operating the
user button that is assigned with the “Clip
Review
” function.
0
Last 5sec:
Views about 5 seconds of the clip from the
ending.
0
Top 5sec:
Views about 5 seconds of the clip from the
beginning.
0
Clip:
Views the entire clip.
[Setting Values:
RLast 5sec, Top 5sec, Clip]
Spot Meter
For configuring the behavior when operating the
user button that is assigned with the “Spot Meter”
function.
0
Max & Min:
Displays the brightest and darkest areas of the
image.
0
Max:
Displays the brightest area of the image.
0
Min:
Displays the darkest area of the image.
0
Manual:
Displays the image brightness at a specified
position.
[Setting Values: RMax & Min, Max, Min, Manual]
Memo :
0
When “HLG”
is selected in [Camera Process] B
[Color Space], the value of the spot meter
changes according to the setting of [LCD/VF] B
[Convert to ITU709]/[White Level].
AE Lock
For configuring the behavior when operating the
user button that is assigned with the “AE Lock”
function.
0
FAW:
Use this to fix the FAW (Full-time Auto White
Balance) function to the value when the user
button assigned with “AE Lock” is pressed.
0
AE:
Use this to fix the Auto function of Gain, Iris, or
Shutter to the value when the user button
assigned with “AE Lock” is pressed.
0
AE/FAW:
Use this to fix the FAW (Full-time Auto White
Balance) function
and the Auto function of Gain,
Iris, or Shutter to the value when the user button
assigned with “AE Lock” is pressed.
[Setting Values: FAW, RAE, AE/FAW]
Memo :
0
This feature
only works when Iris, Shutter, Gain
or White Balance is set to Auto mode.
0
“AE Lock” is canceled when the user button
assigned
with “AE Lock” is pressed, or when any
of the functions that can be locked is operated
regardless of the mode (Manual or Auto).
0
“AE
Lock”
is canceled when the lens extender is
operated and when the iris is adjusted by 2/3
(two-third) stop or more.
0
“AE Lock” is canceled in the following cases.
0
When the user button that is assigned with
“AE Lock” is pressed
0
When
changes
are made to the iris (including
operation of the lens extender), gain and
shutter settings
0
When changes are made to the AE level
0
When there is a switch between the Camera
and Media modes
Zoom Speed
For configuring the zoom speed when operating
the user button that is assigned with “Zoom Tele”
or “Zoom Wide
”.
Increasing the value increases the speed.
[Setting Values: 8 to R 5 to 1]
Camera Function Menu
113
Menu Display and Detailed Settings