User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Camera Process Menu
Menu screen for adjusting the quality of camera
images.
This item cannot be selected in the Media mode.
Color Space
For configuring the color space that is used inside
the camera.
The gamma
and color gamut change automatically
according to the selected color space.
When [System] is configured to a setting other than
“SD” and “SD(SDI In)”
0
J-Log1:
Color
space
that supports 800% dynamic range
and log gamma
0
HLG:
Color space that supports the ITU2100 HLG
HDR
0
ITU2020:
Color space that supports the ITU2020 wide
color gamut
0
ITU709:
ITU709 color space
[Setting Values: J-Log1, HLG, ITU2020, RITU709]
When [System] is set to “SD” or “SD(SDI In)” 2
0
ITU601 (EBU):
Color space
that supports the EBU color gamut
0
ITU601 (170M):
Color space that supports the SMPTE170M
color gamut
0
ITU709:
ITU709 color space
[Setting Values: ITU601 (EBU), ITU601 (170M),
RITU709]
Memo :
0
When [System] is set to
“HD” and when “J-
Log1”
or “HLG” is selected, some menu items
under [Camera Process] cannot be configured.
0
The AE function does not function when
“J-
Log1” or “HLG” is selected. When the
[AUTO
IRIS] switch on the lens is set to “AUTO”, the iris
is fixed at “F4”.
9
Colorimetry
For configuring
the standard for converting R, G, B
signals to Y, Cb, Cr signals when [Color Space] is
configured to “HLG” or “ITU2020”.
0
ITU2020:
Records and outputs ITU2020 RGB signals
using
the
Y-Cb-Cr signal conversion coefficient.
0
ITU709:
Records and outputs ITU709 RGB signals using
the Y-Cb-Cr signal conversion coefficient.
[Setting Values: RITU2020, ITU709]
Memo :
0
This item is available when [Color Space] is set
to “HLG” or “ITU2020”.
0
This is fixed at
“ITU709
” when [Color Space] is
set to “J-Log1” or “ITU709”.
0
This
is
fixed at “ITU601” when [System] is set to
“SD” 2.
Gamma
For adjusting
the gamma curve that determines the
gradation expression.
(A P173 [Adjusting the Gamma] )
0
Cinema 2:
Sets to a gamma curve with soft expression
giving priority to high luminance gradation.
0
Cinema 1:
Sets to
a gamma curve with similar gradation to
the screen characteristics of movies.
0
Standard:
Sets to a standard gamma curve.
0
Off:
Does not perform adjustment.
[Setting Values: Cinema 2, Cinema 1, RStandard,
Off]
Memo :
0
[Gamma] cannot be configured when [Color
Space] is set to “HLG” or “J-Log1”. “HLG
Gamma” is used during
“HLG” and “J-Log1
Gamma” is used during “J-Log1”.
116
Camera Process Menu
Menu Display and Detailed Settings