User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
9
Level
The amount of correction can be specified
separately when [Gamma
] is set to “Standard”,
“Cinema 1” or “Cinema 2”.
When [Gamma] is set to “Standard”
[Setting Values: 0.35 to R 0.45 to 0.55 (in steps of
0.01)]
0
Increase the number:
Finer gradation at bright areas and coarser
gradation at dark areas.
0
Decrease the number:
Finer gradation at dark areas and coarser
gradation at bright areas.
When [Gamma] is
set
to “Cinema 1” or “Cinema 2”
[Setting Values: +10 to R 0 to -10]
0
Increase the number:
Finer gradation at dark areas and coarser
gradation at bright areas.
0
Decrease the number:
Finer gradation at bright areas and coarser
gradation at dark areas.
Memo :
0
When [Gamma] is set to “Standard” with the
value set at
[0.45], the gamma adjusted
conforms to ITU709 or ITU2020.
0
If
[Gamma
] is set to “Cinema 2”, the maximum
peak signal decreases from 109% as the
number becomes smaller in the setting values
from 0 to -10. When the level is at -10, the video
input with a dynamic range of 600% will be kept
within a 100% output.
0
The level cannot be configured when [
Gamma]
is set to “Off” or [Color Space] is set to “HLG” or
“J-Log1”.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: +20 to -20, Off] (Default Value: -6
for “J-Log1” and “HLG” of Color Space; 0 for all
other settings)
Memo :
0
The setting
values of this item and [Adjust...] are
stored separately when [Color Space] is set to
“HLG” or “J-Log1”.
9
Adjust...
For specifying the detailed settings of the contour
(detail).
(A P
121 [Detail/Adjust Item] )
Memo :
0
This item
cannot be selected when [Detail] is set
to “Off”.
Master Black
For adjusting
the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: +50 to +1, R0, -1 to -50]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1”.
0
The
setting
value of this item is stored separately
when [Color Space] is set to “HLG”.
Black Paint
For
adjusting
the R (red) and B (blue) components
of black.
[Setting Values: +50 to +1, R0, -1 to -50]
Memo :
0
This item cannot be configured when [Color
Space
] is set to “J-Log1” or “HLG”.
Flare
Performs flare correction.
[Setting Values: ROn, Off]
9
Master Flare
Performs correction to prevent the entire image
from turning white due to light that enters the lens.
The image
appears blacker with a larger value, and
whiter with a smaller value.
[Setting Values: +20 to +1, (R0), -1 to -20]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1” or “HLG”.
9
Flare Balance
For adjusting the balance between R (red) and B
(blue).
[Setting Values: +10 to +1, (R0), -1 to -10] (R/B)
V. Shading
For adjusting shading (color shift) in the vertical
direction which occurs due to the lens
characteristics.
0
On:
For adjusting shading.
0
Off:
Fixes shading adjustment. Manual adjustment
is not allowed.
[Setting Values: On, ROff]
9
Adjust
Performs vertical shading adjustment when [V.
Shading] is set to “On”.
[Setting Values: -128 to R 0 to +127]
(A P67 [Vertical Shading Adjustment] )
Camera Process Menu
117
Menu Display and Detailed Settings