User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Black Toe
Process the
dark areas according to the balance of
bright and dark areas in the image to adjust the
overall balance of contrast.
For altering the gain of dark areas. Adjust this item
according to the condition of the captured video
signals.
0
Stretch:
Increases the gain of dark areas in an image to
stretch the signals of these areas only, thereby
showing the contrast between bright and dark
areas more clearly.
Specify the amount of stretch with [Stretch
Level].
0
Normal:
Normal condition.
0
Compress:
Compresses the gain of dark areas to increase
the contrast when the entire image appears
bright and contrast is weak. Specify the
compression amount with [Compress Level
].
[Setting Values: Stretch,
RNormal, Compress]
Memo :
0
This item cannot be configured when [Color
Space
] is set to “J-Log1” or “HLG”.
0
When “Black Stretch” or “Black Compress” is
assigned
to
the [USER2] switch, priority is given
to the user button setting and configuration
using the menu is disabled.
9
Stretch Level
Stretch amount increases when a larger value is
specified.
[Setting Values: 5 to 1 (R 3)]
Memo :
0
This item is displayed only when [
Black Toe] is
set to “Stretch”. Otherwise, this item appears as
“---” and cannot be selected.
0
This item cannot be configured when
[Color
Space] is set to “J-Log1” or “HLG”.
9
Compress Level
Compression amount increases when a larger
value is specified.
[Setting Values: 5 to 1 (R 3)]
Memo :
0
This item is displayed only when [
Black Toe] is
set to “Compress”. Otherwise, this item appears
as “---” and cannot be selected.
0
This item cannot be configured when [Color
Space] is set to “J-Log1
” or “HLG”.
Knee Level
For specifying the start point (knee point) for
compressing the
video signal to show the gradation
of the highlighted portion. Set the [OUTPUT] switch
to “AUTO KNEE OFF”.
[Setting Values: 109.0%, 107.5%, 105.0%,
102.5%, 100.0%, 97.5%, R 95.0%, 92.5%, 90.0%,
87.5%, 85.0%, 82.5%, 80.0%, 77.5%, 75.0%,
72.5%, 70.0%]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1” or “HLG” and when
[Gamma] is set to
“Cinema 2”.
Auto Knee Sensitivity
For configuring the response speed of the knee
operation when the [OUTPUT] switch is set to
“AUTO KNEE ON”. Set to “Slow” when shooting an
object under a condition where there is drastic
change in the light intensity.
[Setting Values: RFast, Middle, Slow]
Memo :
0
This item cannot be configured when [Color
Space] is set to
“J-Log1” or “HLG” and when
[Gamma] is set to
“Cinema 2”.
Auto Knee Peak Filter
For configuring the response speed of the knee
operation with respect to a high-luminance point
light source
and the like when the [OUTPUT] switch
is set to “AUTO KNEE ON”.
[Setting Values: RHigh, Middle, Low]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1” or “HLG” and when
[Gamma] is set to
“Cinema 2”.
118
Camera Process Menu
Menu Display and Detailed Settings