User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
9
Adjust
This item is used to adjust [Color Matrix
] to a color
according to the user’s preference.
The adjusted values of “Natural”, “Standard”,
“Cinema Vivid”, and “Cinema Subdued” in [Color
Matrix] can be stored individually.
o
Linear Adjust:
The saturation, hue and brightness of the
primary and complementary colors (6 colors in
total) can be set individually when
“On
” is
configured.
o
Multi Adjust:
The saturation
and hue of the 16 hue axes (R/R
+/Mg-/Mg/B-/B/B+/Cy-/Cy/Cy+/G-/G/G+/Yl/Yl
+/R-) can be set when “On” is configured.
When the USER1 button is pressed while the
multi adjustment screen is displayed, only the
colors of
the hue under adjustment remain in the
following cases. The other colors become black
and white.
0
LCD monitor and viewfinder video images
0
[HD/SD SDI OUT2] terminal output when [A/V
Set]→[SDI OUT2] is set to “VF”
0
[HDMI]
terminal
output when [A/V Set]→[HDMI
OUT] is set to “VF”
(A P174
[Adjusting Color Matrix] )
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1”.
0
The
setting
value of this item is stored separately
when [Color Space] is set to “HLG”.
Color Gain
For adjusting the video signal color level.
Increasing the value deepens the color.
[Setting Values: +15 to -50, Off (R0)]
Memo :
0
Images are displayed in black-and-white when
this is set to “Off
”.
0
This item cannot be configured when [Color
Space] is set to “J-Log1”.
0
The
setting
value of this item is stored separately
when [Color Space] is set to “HLG”.
Reverse Picture
For recording images correctly by setting this item
to “Rotate” when the lens image appears upside
down or laterally inverted.
0
Rotate:
Enables horizontal/vertical inversion of the
image.
0
Off:
Disables horizontal/vertical inversion of the
image.
[Setting Values: Rotate, ROff]
DNR
Decreases noise in the image.
[Setting Values: High, RMiddle, Low]
Reset Process
Restores all items in the [Camera Process] menu
to their default settings.
120
Camera Process Menu
Menu Display and Detailed Settings