User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail)
in
the horizontal (H) or vertical (V) direction.
0
H+1 to H+20:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+20:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+20 to H+1, RNormal, V+1 to V
+20]
H Frequency
For specifying the correction frequency of the
horizontal contour.
Set this according to the object.
0
High:
Emphasizes the
high frequency range. Use this
when shooting objects with fine patterns.
0
Middle:
Emphasizes the intermediate frequency range.
0
Low:
Emphasizes the low frequency range. Use this
when shooting objects with large patterns.
[Setting Values: High, RMiddle, Low]
V Frequency
For specifying the correction frequency of the
vertical contour. Set this according to the object.
0
High:
Emphasizes the high frequency range.
0
Middle:
Emphasizes the intermediate frequency range.
0
Low:
Emphasizes the low frequency range.
[Setting Values: High, RMiddle, Low]
Coring
For configuring the degree of enhancement with
respect to
low-level signals (noise, etc.) with subtle
“outline” enhancement.
Applies outline enhancement to even low-level
signals when the setting is closer to -20, and outline
enhancement of low-level signals becomes less
noticeable with noise suppressed when the setting
is closer to +20.
[Setting Values: +20 to +1, R0, -1 to -20]
Level Depend
Configure this
item when areas such as the darker
portions of the video image appear coarse when
the Detail function is applied.
+1 reduces the outline enhancement of dark areas
and suppresses the noise, while -1 enhances the
outline of dark areas.
[Setting Values: +1, R0, -1]
Posi Gain
For configuring the amount of detail in the white
direction of the outline enhancement signals.
[Setting Values: +20 to +1, R0, -1 to -20]
Nega Gain
For configuring the amount of detail in the black
direction of the outline enhancement signals.
[Setting Values: +20 to +1, R0, -1 to -20]
Knee Gain
For configuring
the amount of detail at the highlight
areas of the video image. A larger value further
enhances the outline of the signals at the highlight
areas. While a smaller value reduces the outline of
the highlight areas, moire (aliasing) due to white
clipping at the highlight areas is also less likely to
occur.
[Setting Values: 32 to R16 to 0]
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1” or “HLG”.
Skin Detail
Detects the skin tone and smooths the outline.
[Setting Values: On, ROff]
9
Level
For configuring the outline correction level when
[Skin Detail
] is set to
“On”.
The smaller the number, the smoother the video.
[Setting Values: -1 to R -5 to -10]
Camera Process Menu
121
Menu Display and Detailed Settings