User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Mode
For configuring the TC mode settings.
0
SW Set:
Follows the settings of the [TC GEN] switch.
0
Clock:
This is set to “Clock” when the [TC GEN] switch
is set to “F-RUN”.
[Setting Values: RSW Set, Clock]
Memo :
0
When
the
[TC GEN] selection switch is set to “R-
RUN” or “REGEN”, or during “Interval
Rec”1, “Frame Rec”1 and “High-
Speed”2, the setting is fixed at “SW Set”.
TC Preset
For setting the time code (hour, minute, second,
frame).
Display :
Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
(A P74 [Setting Time Code Generator] )
Memo :
0
When the [TC GEN]
switch is set to “REGEN”,
“<Regen>” is displayed and preset is disabled.
0
When [TC Mode
] is set to “Clock
”, “<Clock>” is
displayed and preset is disabled.
UB Mode
For setting the recording mode of the user’s bit.
0
Date:
Records the date.
0
Time:
Records the time.
0
Preset:
Records according to the preset setting.
(A P77 [Setting the User’s Bit] )
[Setting Values: Date, Time, R
Preset]
Memo :
0
If [UB Mode] is set to “Time”, the user’s bit
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
9
Preset
For setting the user’s bit. (Digit by digit)
Display :
AB CD EF 01
(A P77 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to “Date” or “Time
”, this
item appears as “---” and preset is disabled.
0
When the [TC GEN
]
switch is set to “REGEN”,
“<Regen>” is displayed and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame mode.
Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
0
This item can be set only when [System]
B
[Record Set] B [Record Format] B [WFrame
Rate] is set to “60p”, “30p”, or “60i”. When
[Frame Rate] is “24p”2, “Non Drop”
becomes fixed and cannot be selected. When
[Frame Rate] is “50p”, “25p”, or “50i”, this item
appears as “---” and cannot be selected.
(A P
152 [ W
Frame Rate ] )
124
TC/UB Menu
Menu Display and Detailed Settings