User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P126 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P128 [Marker Settings Item] )
Display Type...
For specifying display-related settings.
(A P129 [Display Type Item] )
Display On/Off...
For configuring the on/off setting of the screen
display.
(A P130 [Display On/Off Item] )
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select “On” to display in color, and “Off
” to display
in black-and-white.
[Setting Values: ROn, Off]
LCD Contrast
For setting
the difference in luminance between the
darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: +10 to +1, R0, -1 to -10]
LCD Bright
For configuring
the brightness of the LCD monitor.
Increasing the value increases the brightness.
[Setting Values: +10 to +1, R0, -1 to -10]
LCD Peaking
For adjusting
the outline of the image displayed on
the LCD monitor.
[Setting Values: +10 to +1, R0, -1 to -10]
Convert to ITU709
When [Color Space] is set to “ITU2020
”, “J-Log1”
or “HLG”, the video images on the LCD monitor and
viewfinder are converted to the ITU709 color space
for display.
0
When [A/V Set] B [Video Set] B [SDI OUT2]
is
set
to “VF”, the [HD/SD SDI OUT2] terminal
output is also converted.
0
When [A/V Set] B[Video Set] B [HDMI
OUT] is set to
“VF
”, the [HDMI] terminal
output is also converted.
0
Cam + Return:
The camera and return videos are converted
from the color space configured in [Color
Space
]
to the ITU709 color space.
0
Cam:
Only the camera video is converted to the
ITU709 color space.
0
Off:
Not converted.
[Setting Values: Cam + Return, Cam, ROff]
Memo :
0
This item can be configured only when [Color
Space
] is set to “ITU2020”, “J-Log1” or “HLG”.
LCD/VF Menu
125
Menu Display and Detailed Settings