User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Zero Config
For allowing this camera recorder to be detected
automatically by external devices (such as
switchers) connected to the same LAN.
Connection can be established via one link from
the menu of the external device.
Memo :
0
The Zero Config function is not equipped with
the function
to change the settings of the camera
recorder.
9
Announcement
For configuring the method of connection from an
external device during automatic detection of this
camera recorder.
[Setting Values: RAll, LAN, USB/Int. WLAN, Off]
u v
[Setting Values: RAll, LAN, USB, Off] w x
Only for cellular adapter connection (USB)
[Setting Values: RLAN, Off]
9
Hostname Prefix
Part of the host name can be changed.
It will appear in the format of
“XXXX-YYYY.local
”
on the Status screen (network).
XXXX : Character string (maximum 8 characters)
configured in [Hostname Prefix]
YYYY : Serial number of this camera recorder
Memo :
0
When [Announcement
] is set to “Off”, this item
does not appear on the Status screen (LAN,
USB/Int. WLAN u v, USB w x).
Reset Network
Restores all items in the [Network] menu to their
default settings.
Connection Setup Item
Wizard
Displays a [Wizard] screen for connecting to the
network.
Follow the instructions on the screen.
USB/Int. WLAN u v
For configuring the USB/built-in wireless LAN
network connection to On/Off.
[Setting Values: On, ROff]
Setup Fileu v/USB Setup
Filew x
9
Load
Loads the settings on the [
Wizard] screen.
(A P208 [Reading the Connection Settings
File] )
9
Store
Saves the settings on the [Wizard] screen.
(
A P207 [Saving the Connection Settings File] )
9
Delete
Deletes the saved settings.
(A P209 [Deleting Connection Settings] )
Default Gateway
For
configuring
the gateway to be used. Select the
terminal that is connected to the router for external
network access.
[Setting Values: RLAN, USB/Int. WLAN] u v
[Setting Values: RLAN, USB] w x
FTP Proxy...
For setting the FTP proxy.
9
Type
Select the type of FTP proxy.
[Setting Values: RNo Proxy, HTTP]
9
Server
Set the FTP proxy server name.
Memo :
0
Enter the name using the onscreen keyboard.
0
You can enter characters not more than 127
bytes using single-byte alphanumeric
characters (a to z, 0 to 9), single-byte hyphen
(“-”) or dot (“.”).
0
When [Type
] is set to “No Proxy”, changes
cannot be made.
9
Port
Set the FTP proxy port number.
Memo :
0
Enter the name using the onscreen keyboard.
0
Enter an integer between 1 and 65535.
140
Network Menu
Menu Display and Detailed Settings