User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
o
Destination URL
For entering the URL of the live distribution
destination beginning with “rtmp://”.
There is no default value (blank).
* You can enter up to 191 characters and ASCII
characters.
Memo :
0
This
item
is selectable only when [Type] is set to
“RTMP”.
o
Destination Port
Enter the network port number of the live
distribution destination
using an integer between 1
and 65535.
When [Type] is set to “MPEG2-TS/UDP”, “MPEG2-
TS/TCP” or “MPEG2-TS/RTP”, the default value is
“6504”. If “ZIXI” is set, the default value is “2088”.
Memo :
0
When [Type] is set to “MPEG2-TS/RTP”, only
even numbers from 2 to 65530 can be specified
for the port number.
0
When [Type] is set to “MPEG2-TS/RTP
” and
[SMPTE 2022-1 FEC] is set to “On”, N+2 and N
+4 port numbers are also used in addition to the
specified port number (N). 0
o
Stream ID
For setting the registered stream ID of the live
distribution destination.
The default value varies with the product model.
* Enter not more than 63 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
Stream Key
Enter the stream key specified at the live
transmission destination.
There is no default value (blank).
* Enter not more than 127 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“RTMP”.
o
Username
For setting the user name.
The default value is “JVC”.
*
Enter not more than 31 characters.
Memo :
0
This
item
is selectable only when [Type] is set to
“RTSP/RTP”.
o
Password
For setting the [Stream ID] password.
For ZIXI, there is no default value (blank).
For RTSP/RTP,
a random alphanumeric value that
varies with each model is assigned as the default
value.
* Enter not more than 127 characters. Enter not
more than 31 characters for RTSP/RTP setting.
o
Latency
For setting the latency mode.
[Setting Values: High, Medium, RLow, Min]
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
Adaptive Bit Rate 0
If “On” is selected, the bit rate setting value of live
streaming is set to maximum limit, and the bit rate
is changed automatically according to changes in
the network bandwidth.
[Setting Values: On, ROff]
Memo :
0
[Adaptive Bit Rate] can be configured when
[Type
] is configured to “ZIXI”.
* The bit rate is displayed on the status screen
only when “On” is set.
o
SMPTE 2022-1 FEC 0
Set to “On” to use FEC (Forward Error Correction).
A transmission system that recovers the missing
packets
in the decoding process without having to
retransmit the missing packets.
[Setting Values: On, ROff]
* The decoder must be compatible with SMPTE
2022-1.
Memo :
0
This item
is selectable only when [Type] is set to
“MPEG2-TS/RTP”.
142
Network Menu
Menu Display and Detailed Settings