User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
o
FEC Matrix 0
For setting the amount of FEC (Forward Error
Correction) overhead for configuring
SMPTE2022-1.
(A P215 [Setting the FEC Matrix
0] )
Memo :
0
This item is selectable only when [SMPTE
2022-1 FEC
] is set to “On”.
Resolution
For setting
the resolution of the video image during
live distribution.
The available options vary according to the settings
for [WResolution] and [WFrame Rate] under
[Record Format].
W Resolution
Setting Value
1920x1080 1920x1080, 1280x720,
640x360 2,
720x480 2 (U model)
720x576 2 (E model)
1280x720 1280x720,
640x360 2
720x480 2 (U
model)
720x480 2
720x576 2 (E
model)
720x576 2
Memo :
0
The setting cannot be changed during live
streaming (when [Live Streaming] set to “On”).
0
The Aspect
Ratio for the live streaming image is
fixed to “16:9”.
Frame Rate
For setting
the frame rate of the video image during
live distribution.
The options vary according to the settings of [Live
Streaming Set] B [Resolution] and the [WFrame
Rate] settings under [Record Format].
W Frame Rate
Setting Value
60p, 60i 60p, 60i, 30p
50p, 50i 50p, 50i, 25p
30p 30p
25p 25p
Memo :
0
The setting cannot be changed during live
streaming (when
live streaming is configured to
“On”).
Bit Rate
For setting the encode bitrate of the video image
during live distribution.
The selectable options vary according to the
settings in
[Live Streaming Set] B [Resolution] and
[Bit Rate].
For details on the settings, please refer to
[Distributable [Record Format] and [Live Streaming
Set] Combinations] (A P 212).
Memo :
0
The setting cannot be changed during live
streaming (when [Live Streaming] set to “On”).
0
Depending on
the type of network adapter used
and the connection, images and audio sound
during live streaming may be choppy.
Return over IP Item 0
Return over IP
For configuring Return over IP to On/Off.
[Setting Values: On, ROff]
Server
For selecting the source server for sending out
Return over IP audio/video.
[Setting Values: RServer1, Server2, Server3,
Server4]
Memo :
0
The setting cannot be changed while Return
over IP
is operating (when [Return over IP] is set
to “On”).
9
Return Server
For configuring the source server for sending out
Return over IP audio/video.
Memo :
0
The setting cannot be changed while Return
over IP
is operating (when [Return over IP] is set
to “On”).
9
Server1, Server2, Server3, Server4
* The name that is set in
[Alias] is displayed
individually.
Network Menu
143
Menu Display and Detailed Settings