User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
o
Alias
For setting
a name to distinguish the settings of this
camera.
The name set in this item will be displayed in the
[Server] options.
*1 The default value is “Server1/Server2/
Server3/Server4”.
*2 You can enter up to 31 characters and ASCII
characters.
o
Type
For configuring the system for transferring video
and audio to be distributed.
[Setting Values: RRTSP/RTP, ZIXI o, Icecast]
Memo :
0
Operates as IFB when the setting is configured
to “Icecast
”.
0
Use transmission devices that are compatible
with the respective transfer systems.
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
The following items that can be set vary
depending on the setting of this item.
o
Protocol
For configuring the protocol of the video/audio
source server to be connected.
[Setting Values: RUDP, TCP]
Memo :
0
This item
is selectable only when [Type] is set to
“RTSP/RTP”.
o
Source Address
For configuring details such as the host name and
IP address
of the video/audio transmission source.
There is no default value (blank).
* You can enter up to 191 characters and ASCII
characters.
o
Source Port
Enter the network port number of the video/audio
transmission source using an integer between 1
and 65535.
The default value is
“554
” when [Type] is set to
“RTSP/RTP”, “2077” when it is set to “ZIXI”, and
“5000” when it is set to Icecast.
Memo :
0
When [Type] is set to
“RTSP/RTP”, only even
numbers from 2 to 65530 can be specified for
the port number.
o
Stream ID
For configuring the stream ID registered on the
video/audio transmission source.
There is no default value (blank).
* Enter not more than 63 characters.
Memo :
0
This item is available for setting when [Type
] is
set to “RTSP/RTP” or “ZIXI”.
o
Username
For setting the user name.
There is no default value (blank).
* Enter not more than 63 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“RTSP/RTP”.
o
Password
For setting the password.
There is no default value (blank).
* You can enter up to 31 characters when [Type]
is set to “RTSP/RTP”.
* You can enter up to 127 characters when [Type]
is set to “ZIXI”.
Memo :
0
This item is available for setting when [Type
] is
set to “RTSP/RTP” or “ZIXI”.
o
Name
For configuring the name.
The default value is “HC900”.
* Enter not more than 31 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
Latency
For setting the latency mode.
[Setting Values: Medium, RMinimum, Off]
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
Mountpoint
Enter the mountpoint (character string for
identifying a stream) for streaming servers that
support multiple streams.
There is no default value (blank).
* Enter not more than 63 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“Icecast”.
144
Network Menu
Menu Display and Detailed Settings