User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Record Set Item
Record Format
After setting of all items in the
[Record Format
]
menu is complete, select [Set] at the bottom of the
screen to apply the new settings on the camera
recorder and switch the recording format. A
“Please Wait...” message appears during
switching.
9
System
For selecting a system definition.
0
HD:
Records in
“HD” (High Definition) quality for both
slots A and B.
0
SD2:
Records in
“SD” (Standard Definition) quality for
both slots A and B.
0
HD+Web2:
Records in “HD”
(high definition) for slot A, and
in resolution suitable for web distribution for slot
B.
0
HD(SDI In):
Records the HD SDI video of the device
connected to the [HD/SD SDI IN] terminal in
“HD” to both slot A and slot B.
0
SD(SDI In)
2:
Records the SD SDI video of the device
connected to the
[HD/SD SDI IN] terminal in
“SD” to both slot A and slot B.
0
High-Speed
2:
Records slow motion videos in
“HD” (High
Definition) for both slot A and slot B.
[Setting
Values: RHD, SD2
, HD+Web2,
HD(SDI In), SD(SDI In)2, High-Speed2]
Caution :
0
The selectable options for the [WFormat],
[WResolution], [WFrame Rate], [WBit Rate]
[WAudio], [YFormat], [YResolution], [YFrame
Rate], [YBit Rate] and [YAudio] settings vary
depending on the setting of this item.
0
When [System] B [Record Set]
B [Record
Format] B [System] is configured to “High-
Speed”2, network cannot be used via
wireless LAN u v or the [HOST] terminal
(USB). Configure as follows in this case.
0
Set
[Network]
B [Connection Setup] B [USB/
Int. WLAN] to “Off”. u v
0
Unplug the USB network adapter
Note that camera operation will come to an
emergency
stop
and the power will turn off if the
above steps are not performed.
File data may be damaged if this happens while
recording is in progress.
9
W Format
For
selecting
the format of the file to be recorded to
the SD card in slot A.
0
QuickTime(MPEG2):
QuickTime file format (.MOV)
0
MXF(MPEG2)0:
MXF (material exchange format)
0
QuickTime(H.264):
QuickTime file format (.MOV)
0
Exchange0: (U model only)
Sports Video Interop Group format
0
MP4 (H.264)0: (E model only)
MP4 file format
[Setting Values: QuickTime(MPEG2),
MXF(MPEG2), RQuickTime(H.264), Exchange]
(U model only)
[Setting Values: QuickTime(MPEG2),
MXF(MPEG2), RQuickTime(H.264), MP4 (H.
264)](E model only)
Memo :
0
When [System
] is set to “SD”2 or “SD(SDI
In)”2, this item is fixed at “QuickTime(H.
264)”.
0
When [System
] is set to “HD+Web”, this item is
fixed at “QuickTime(H.264)”. 2
0
When
[System]
is set to “High-Speed”, this item
is fixed at “QuickTime(H.264)”. 2
0
Exchange (U model) and MP4 (H.264) (E
model) are selectable only when
[System] is
configured to “HD” or “HD(SDI In)”.
0
Exchange format is used under license from
Sports Video Interoperability Group, Inc..
System Menu
151
Menu Display and Detailed Settings