User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
C
Operation lock
The r icon appears during operation lock.
(A P53 [Operation Lock Feature] )
Memo :
0
The s icon appears for 3 seconds after
operation lock is turned off.
D
Black Toe
Displays the Black Toe setting.
Memo :
0
The “Normal” appears for 3 seconds after
changing to Normal.
E
Skin Detail
e appears when Skin Detail is functioning.
Memo :
0
f appears for 3 seconds after Skin Detail is
turned off.
F
Color Space Display
Displays the color space.
Memo :
0
This can be configured in [Camera Process]
B
[Color Space].
(A P
116 [ Color Space ] )
G
Audio Level Meter
0
Displays the audio levels for CH-1 to CH-4.
0
a appears on the screen when in the Auto
mode.
.
0
This is grayed out when in a mode that does
not support audio recording or when the
audio is not supported. The CH display is
grayed out in the enlarged display mode.
.
0
When in the enlarged display mode, the
display changes with the setting of the
[AUDIO INPUT CH1/CH2/CH3/CH4]
selection switch.
Example: During 1ch and 3ch display
FRONT1: When
the selection switch is set
to “FRONT” and [Front Mic Select] is set to
a value other than “Mono”
FR1+2: When the selection switch is set to
“FRONT” and [Front Mic Select] is set to
“Mono”
REAR1: When the selection switch is set to
“REAR”
WL1: When the selection switch is set to
“WIRELESS”
H
Iris F-Number
Displays F-number of the lens iris.
(A P60 [Adjusting the Iris] )
Memo :
0
This item may not be displayed depending on
the lens used.
0
A a icon appears on the left side of the lens
aperture value (F-number) during Auto Iris
mode.
0
While in
the Auto Iris mode, and [AE Lock] is set
to “AE” or “AE/FAW”, a
icon appears on the
left side of the lens aperture value (F-number)
during lock operation.
(A P113 [ AE Lock ] )
I
ND Filter Position
Displays the current ND filter position.
162
Display Screen in Camera Mode
Display/Status Screen