User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
J
Shutter
0
The current shutter speed appears on the
screen.
(A P109 [ Shutter ] )
0
When the
camera recorder is switched to the
Full Auto shooting mode using the user
button that is assigned with “Full Auto” or
when it is switched to the Automatic Shutter
mode with [Camera Function] B [Shutter] set
to “EEI”, the a icon appears on the left side of
the shutter speed.
Memo :
0
The variable range of the shutter speed varies
according to the video format settings.
(A P62 [Setting the Electronic Shutter] )
0
While in the Automatic Shutter mode, and [
AE
Lock] is set to “AE” or “AE/FAW”, a
icon
appears on the left side of the shutter speed
during lock operation.
0
[OFF
]
is displayed when the shutter is turned off
or when in the Low-light shooting mode.
K
AE Level
0
Displayed when
the AE function is activated.
0
When operated while manual operation is
disabled, “AE” blinks for about 5 seconds.
L
Gain
0
You can select to display the gain in “dB” or
“ISO”.
(A P
130 [ Gain ] )
0
Displays the gain value when in the Manual
Gain mode.
0
A
a icon appears on the left side of the gain
value in the “AGC” mode.
0
“LUX” is
displayed to the left of the gain value
when in the Low-light shooting mode.
Memo :
0
While in the “AGC” mode, and [AE Lock] is set
to “AE” or “AE/FAW
”, a
icon appears on the
left side of the gain value during lock operation.
M
White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A *****K : When the [WHT BAL B/A/PRST]
switch is set to “A” in the Manual White
Balance mode.
B *****K : When the [WHT BAL B/A/PRST]
switch is set to “B” in the Manual
White Balance mode.
P *****K : When the [WHT BAL B/A/PRST]
switch is set to “PRST” in the Manual
White Balance mode.
a
FAW : During Full Auto White Balance
mode.
FAW : While in the Full Auto White Balance
mode, and [AE Lock] is set for “FAW”
or “AE/FAW” during lock operation.
(A P64 [Preset Mode (PRST)] )
(A P65 [Memory A Mode (A), Memory B Mode
(B)] )
Memo :
0
When [Preset Paint], [AWB Paint] or [FAW
Paint
] is set to a setting other than the default
value, a q icon is displayed to the right of the
color temperature.
N
Expanded Focus/Video Signal Monitor/Return
Video (PiP)
Displayed upon
pressing the user button that is
assigned with “Expanded Focus”, “Video Signal
Monitor” and “Return Video” (PiP).
Memo :
0
The order of display is “Expanded Focus
” >
“Video Signal Monitor” > “Return Video” (PiP).
O
Focus Assist
0
“ ” is displayed when auto focus is
activated.
0
When ACCU-Focus is enabled, “ACCU ”
blinks for about 10 seconds while Focus
Assist starts up, after which the “ ”
indicator lights up.
0
If recording starts while [ACCU-Focus] is
active,
[ACCU-Focus] will be forcibly
deactivated.
(A P
126 [ Focus Assist ] )
Display Screen in Camera Mode
163
Display/Status Screen