User's Manual

a
Media Status
---- :
A card is not detected in the
selected slot, and [Tally
System] is also not set to
“Studio”
STBY : Recording standby
RREC : Recording
REVIEW : Clip Review
(A P84 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P : Pre Rec recording standby
(A P90 [Pre Rec 0] )
RRECP : Pre Rec recording
(A P90 [Pre Rec 0] )
STBY C : Clip Continuous Rec recording
standby
(A P91 [Clip Continuous Rec 0] )
RRECC : Clip Continuous Rec recording
(A P91 [Clip Continuous Rec 0] )
STBYC
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(A P91 [Clip Continuous Rec 0] )
STBY N : Interval Rec recording standby
(A P93 [Interval Rec 1] )
STBYN
(displayed in
red)
: Interval recording pause
RRECN : Interval Rec recording
(A P93 [Interval Rec 1] )
STBY M : Frame Rec recording standby
(A P92 [Frame Rec 1] )
RRECM : Frame Rec recording
(A P92 [Frame Rec 1] )
STBYM
(displayed in
yellow)
: Frame Rec recording pause
(A P92 [Frame Rec 1] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Q
: During clip cutter recording
(displayed for 3 seconds)
(A P94 [Splitting the Clips Freely (Clip Cutter
Trig) 0] )
CALL : Receiving call signals from an
external device, such as a
remote control unit
PGM : Receiving program signals
from an external device, such
as a remote control unit
PVW : Receiving preview signals
from an external device, such
as a remote control unit
b
Live streaming mark
When [Network] B [
Live Streaming] B [Live
Streaming] is set to “On”, the distribution status
is displayed.
(A P141 [Live Streaming Item] )
Icon Status
.
(Red)
Distribution in progress (good
connection quality)
.
(Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Waiting for connection
(RTSP/RTP only), connection
failed
c
SDI Input Mode/High-Speed Frame Rate
0
“SDI INZ” is displayed when a device is
connected to the [HD/SD SDI IN
] terminal,
and [System] B [Record Set] B [Record
Format] B [System] is set to “HD(SDI In)” or
“SD(SDI In)”2.
0
When [System] B [Record Set
]
B [Record
Format] B [System] is configured to “High-
Speed”2, the setting value for [WFrame
Rate] is displayed.
d
OK Mark
Displayed
when
OK mark has been appended.
(A P101 [Appending/Deleting OK Mark] )
e
Recording Format/Bit Rate (Enlarged Display
Mode Only)
Displays the recording format and bit rate (only
when in the enlarged display mode).
Memo :
0
The resolution, frame rate and bit rate can be
viewed on the status screen.
f
Event/Warning Display Area
Displays error messages.
(A P
218 [Error Messages and Actions] )
g
Dual Rec/ Backup Rec Display (Enlarged
Display Mode Only)
“DUAL”
is displayed in the Dual Rec mode and
“BACKUP” is displayed in the Backup Rec
mode.
(A P155 [ Slot Mode ] )
Memo :
0
Displayed only when in the enlarged display
mode.
166
Display Screen in Camera Mode
Display/Status Screen