User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
G
Information Display
Use the [USER4] button to switch between
camera information display, GPS display and
turning off the display.
0
The
GPS
display displays information on the
recording location of the video being played
back only when GPS information has been
recorded.
0
Camera information display displays only
information of Gain, Iris, Shutter and White
Balance that have been recorded.
.
5600K
1/100
F1. 6
0
dB
+35.483197
+139.652172
USER4
USER4
USER4
GPS Display
Camera Information Display
Display Off
Memo :
0
Trimming information is displayed while
trimming is in progress. In this case, pressing the
[USER4] button does not switch the display.
0
The information
display area is not subject to the
display settings of the items in [LCD/VF] B
[Display On/Off].
H
Date/Time Display
Displays the date/time that is recorded on the
currently played recording media.
Memo :
0
The date/time display style can be specified in
[System] B [Date Style]/[Time Style
].
(A P150 [ Date Style ] )
(
A P150 [ Time Style ] )
I
Network Connection Icon
0
USB connection or built-in wireless LAN
connection u v
0
Set [Network] B [Connection Setup] B
[USB/Int. WLAN] to “On
”. u v
(A P140
[ USB/Int. WLAN u
v ] )
0
In the case of connecting to an external
network, check the destination in
[Network]
B [Connection Setup] B
[Default Gateway].
(A P140
[ Default Gateway ] )
Icon Status
.
Wireless LAN connection from the
host terminal (USB) is established
.
Wired LAN connection from the
host terminal (USB) is established
.
Cellular adapter connection from
the host terminal (USB) is
established
.
When a USB adapter different
from the connection settings is
detected
.
Built-in wireless LAN connection is
established
u v
(No
display)
0
When [USB/Int. WLAN] is set
to “Off”
u
v
0
When an unusable USB
adapter is detected
Memo :
0
The icon appears blinking when the camera
recorder is
starting up, and is displayed in yellow
while getting ready to connect.
0
LAN terminal connection
In the case of connecting to an external network,
check the destination in [Network]
B
[Connection Setup] B [Default Gateway].
Icon Status
.
LAN terminal connection is
established
(No
display)
When the LAN cable is not
connected
Memo :
0
The icon appears blinking when the camera
recorder is
starting up, and is displayed in yellow
while getting ready to connect.
168
Display Screen in Media Mode
Display/Status Screen