User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Power Screen
For checking the power consumption.
.
Memo :
0
[System] shows the power consumption of the
entire camera system (camera recorder +
connecting devices) while [
Connected
Devices] shows the estimated power
consumption of the peripheral equipments such
as lens and wireless slots.
0
When the bar on the bar graph enters the red
zone, it indicates that the power consumption
has exceeded its rating. As this may result in
malfunction, do keep the power consumption
within the rating.
0
If
[System] shows a value that exceeds the
rating, the power to the [LIGHT], [DC OUT] (rear)
and [DC OUT] (LAN) terminals is automatically
cut off. This is not a malfunction. Use peripheral
equipments with lower power consumption then
turn on the power of this camera recorder again.
Planning Metadata Screen
For checking the current planning metadata
setting.
(A P195 [ Planning Metadata ] )
.
Network Screen
For checking the network login information.
.
LAN Screen
For checking the network information for LAN
connection.
.
USB/Int. WLAN Screen v v
USB Screen w x
For checking the network information for the USB
adapter and built-in wireless LAN connections.
.
Streaming Screen
For viewing information related to live streaming.
.
Status Screen
171
Display/Status Screen