User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Connecting External
Monitor
0
To output live or playback video images and
audio sound to an external monitor, select the
output signals from the camera recorder, and
connect
using
an appropriate cable according to
the monitor to be used.
0
Choose the most suitable terminal according to
the monitor in use.
0
[HD/SD SDI OUT] terminal:
Outputs either the 3G-SDI/HD-SDI signal or SD-
SDI signal.
0
[VIDEO OUT] terminal:
Outputs composite video signals.
0
[HDMI] terminal:
Outputs HDMI signals.
Memo :
0
If the [HD/SD SDI OUT
] terminal or [HDMI]
terminal is connected, configure the settings in
the [A/V Set] menu according to the monitor to
be connected.
(A P131
[ SDI OUT1 ] )
(
A P132 [ SDI OUT2 ] )
(A P132 [ HDMI OUT ] )
(A P132 [ VIDEO OUT ] )
.
SDI IN
HDMI
VIDEO IN
* Select the output signal in [A/V Set] B [SDI
OUT1]/[SDI OUT2]/[HDMI OUT].
(A P
131 [ SDI OUT1 ] )
(A P132 [ SDI OUT2 ] )
(A P132 [ HDMI OUT ] )
* When [Record Format] B [System] is set to
“SD”2, only SD-SDI signals are output.
(A P151 [ System ] )
* To display the menu screen or display screen on
the external monitor, set [A/V Set] B [Video
Set] B[SDI OUT2 Char.]/[HDMI Char.]/[Video
OUT Char.] to “On”.
(A P131 [ SDI OUT2 Char. ] )
(A P131 [ HDMI Char. ] )
(A P131 [ Video OUT Char. ] )
Connecting External Monitor
179
Connecting External Devices