User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Connecting the
Headphone
.
0
Audio output
from the [PHONE] terminal can be
selected using [A/V Set] B [Audio Set] B
[PHONE Output] and the combination of the
[MONI SELECT] and [CH SELECT] switches.
(A
P137 [ PHONE Output ] )
0
The outputs from the [PHONE] terminal and
monitor
speaker are as follows according to the
different combinations of settings.
[MONI
SELECT
]
Switch
Setting
[PHONE
Output
]
Setting
[PHONE]
Terminal
Speaker
L R
[CH1/
CH3]
- CH1 CH1
[BOTH]
Mix CH1+CH2
CH1+CH2
Stereo CH1 CH2
[CH2/
CH4]
- CH2 CH2
1
Connect the headphone.
2
Select the channels to monitor using the
different combinations of the [MONI
SELECT
] and [MONI SELECT] switches.
Combinations of
[MONI SELECT]
and [
CH
SELECT]
Switches
Channels
to
Monitor
Description
.
CH1 The audio input to
[CH1
] is output.
.
CH2 The audio input to
[
CH2
] is output.
.
CH1/CH2 The audio inputs
to [CH1] and
[CH2] are output.
.
CH3 The audio input to
[CH3] is output.
.
CH4 The audio input to
[CH4
] is output.
.
CH3/CH4 The audio inputs
to [CH3] and
[CH4] are output.
3
Use the [MONITOR] adjustment knob to
adjust the monitor volume.
Memo :
0
There is
no sound output from the speaker when
the headphone is connected.
Connecting the Headphone
181
Connecting External Devices