User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
o Phase Items to Synchronize
The phase items to be synchronized may vary
depending on the input synchronizing signal and
output video signal.
Output Video Signal
Input Synchronizing
Signal
3G-
SDI
HD-SDI
SD-
SDI
720p
1080i
VIDEO
Composite
V V V, F
H, V,
F
SDI
SD-SDI V V V, F
H, V,
F
HD-SDI
720p
V H, V V V
HD-SDI
1080i
V V
H, V,
F
V, F
3G-SDI
1080p
H, V - - -
Adjusting H Phase
1
Select [Genlock Adjust] in the [A/V Set]
menu.
Adjust the [A/V Set] B [Video Set]
B Genlock
Adjust item as follows.
(A P134 [ Genlock Adjust... ] )
[SD-SDI H Phase] : Adjusts the H Phase
of the SD SDI signal.
[HD-SDI H Phase] : Adjusts the H Phase
of the HD SDI signal.
2
Select a value using the cross-shaped
buttons (JK).
0
The H
Phase of the camera recorder’s video
signal is adjusted with respect to the external
synchronizing signal input from the
[GENLOCK] terminal.
Memo :
0
Adjustment cannot be made while recording or
playback is in progress.
0
The video
image may be disrupted momentarily
during adjustment. This is not a malfunction.
Displaying Return Videos
from an External Device
Return video from an external device (switcher,
etc.) can be displayed on the viewfinder or LCD
monitor of the camera recorder.
Memo :
0
This feature
is only usable in the Camera mode.
1
Set the camera recorder to the Camera
mode.
(A P20 [Operation Modes] )
2
Assign the
“Return Video” function to any
of the user buttons.
(A P45 [Assignment of Functions to User
Buttons] )
3
Configure the input destination of the
return video to “SDI
”0
To specify the input destination of the return
video, configure [A/V Set] B [Video Set
] B
[Return Input] to “SDI”.
(A P135 [ Return Input 0 ] )
Memo :
0
When [System] B [Record Set] B [Record
Format]
B [System] is configured to “HD(SDI
In)” or “SD(SDI In)”2, “---” is displayed and
the setting cannot be configured.
4
Select the aspect ratio of the return video.
Set using [A/V Set] B [Video Set] B [Return
Aspect].
(A P
135 [ Return Aspect ] )
5
Select the way the return video is to be
displayed.
Select in [Camera Function] B [User Switch
Set] B [Return Video
].
The camera will operate
according to the setting.
(A P114 [ Return Video ] )
6
Press the user button that is assigned with
the “Return Video”
function.
0
By pressing
the user button assigned with the
“Return Video” function, the captured image
or return video is displayed according to the
method specified in step 5.
Memo :
0
Compatible input
formats for the return video are
as follows.
0
1920x1080/60p, 60i, 50p, 50i
0
1280x720/60p, 50p
0
720x480/60i 2 (U model)
0
720x576/50i 2 (E model)
184
Inputting External Synchronizing Signals (Genlock)
Connecting External Devices