User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Names of Parts
.
A
C
G K
B
D
E F H I J
A
Speaker
(A P98 [Audio Output during Playback] )
B
Viewfinder Left-Right Position Lock Ring
For
loosening the ring and adjusting the position
of the viewfinder to the left or right.
(A P30 [Attaching the Viewfinder (Supplied)
u v] )
C
Cable Clamp
D
[ND FILTER] Switch
Use the ND filter to keep the lens aperture in the
appropriate range.
1: CLEAR, 2: 1/4, 3: 1/16, 4: 1/64
Memo :
0
It is
recommended to use the ND filter to set the
lens aperture to less than F8.
E
[REC] Button
Starts/stops recording.
F
[SHUTTER] Switch
Push the switch up to turn off the shutter, and
push it down to change the shutter speed.
(A P62 [Setting the Electronic Shutter] )
G
[AWB/USER8]
Switch
0
Push the
switch up for it to function as a AWB
switch. When the [WHT.BAL PRST/A/B]
switch is set to “PRST”, AWB changes the
color temperature according to the preset
white balance, and applies Auto White
Balance when the switch is set to “A” or “B”.
(A P63
[Adjusting the White Balance] )
0
Push the switch down for it to function as a
user button.
It can be assigned with a specific
menu function.
(A P45 [Assignment of Functions to User
Buttons] )
H
[MIC LEVEL] Knob
For manual
adjustment of the recording level for
the microphone that is attached to the [MIC IN]
terminal when the [AUDIO SELECT
CH1/2/3/4]-[MANUAL/AUTO] selection switch
is set to “MANUAL” and the [FRONT/REAR/
WIRELESS] selection switch is set to “FRONT”.
(A P69 [Audio Recording] )
I
Cross-shaped (JKHI)/[SET/USER13] Button
(R)
0
For operating the menu and cursor and for
confirming
a
setting, as well as for configuring
the settings for time code and user’s bit.
0
When in the Camera mode (menu is not
displayed), pressing the [SET/USER13]
button displays the status screen.
0
When a function is assigned to the cross-
shaped button or [SET/USER13
] button, it
functions as a user button. Initial setting for
[USER13]: Status
(A P45
[Assignment of Functions to User
Buttons] )
J
Lens Lock Lever
(
A P30 [Attaching the Lens (Sold
Separately)] )
K
Shoulder Pad
(A P32 [Adjusting the Position of the
Shoulder Pad] )
22
Names of Parts
Introduction