User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Troubleshooting
Symptom Action
Power does not turn on.
0
Is the AC adapter properly connected?
0
Is the battery charged?
0
Is the power turned on immediately after it is turned off?
Make sure to wait for an interval of at least 5 seconds before turning
on the power again.
Unable to start recording.
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
(A P48
[Write-Protect Switch on the SD Card] )
0
Is the camera recorder set to the Camera mode?
Use the
[CAM/MEDIA] selection button to switch to the Camera mode.
(A P20 [Operation Modes] )
0
Is the SD card inserted compatible with the recording format?
(
A P56 [Selecting a Video Format] )
(A P155 [ 4GB File Spanning(SDXC) ] )
Camera image is not output on
the LCD monitor and
viewfinder screen.
0
Is the camera recorder set to the Camera mode?
Use
the
[CAM/MEDIA] selection button to switch to the Camera mode.
(A P20 [Operation Modes] )
Camera
image is not output on
the LCD monitor.
0
Is the LCD backlight set to “Off”?
Press the
[B.LIGHT]
button to switch the mode.
(A P42 [Adjusting the LCD Monitor] )
Camera
image is not output on
the viewfinder screen.
0
Is the CONTRAST knob on the viewfinder set to the minimum?
Adjust the [CONTRAST
]
knob on the viewfinder.
(A P42 [Adjusting the Viewfinder] )
Playback does not start after
selecting a clip thumbnail and
pressing the [STATUS/SET
]
button (
R).
0
Is the selected clip a playable clip?
Playback is not possible if the clip has a different video format setting.
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
0
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [ND FILTER] switch set to “1/64”?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the peaking level too low?
For the LCD monitor, adjust the outline with [LCD/VF] B [LCD
Peaking].
For
the viewfinder, adjust the outline with the [PEAKING] knob on the
viewfinder. u v
(A P
42 [Adjusting the LCD Monitor] )
(
A P42 [Adjusting the Viewfinder] )
Troubleshooting
223
Others