User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
.
L
S
W
V
M
N
O
P
Q
T
R
U
L
Slide Cover (For
[
USER6]/[USER7] Button)
Sliding the cover over the buttons helps to
prevent accidental operation.
M
[USER6] Button
It can be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
N
[USER7] Button
It can be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
O
Back Tally Lamp (Handle)
(A P46 [Tally Lamp] )
P
[TALLY] Switch
(A P46 [Tally Lamp] )
(A P222 [Blinking of the Tally Lamp] )
Q
Wireless LAN Antenna Terminal u v
(A P32 [Attaching the Wireless LAN
Antennas (Supplied) u v] )
R
SD Card Cover Knob
(A P48 [Inserting an SD Card] )
S
SD Card Cover
T
Expansion slot
U
Wireless Audio Receiver Mounting Slot
(“UniSlot”)
A “UniSlot” wireless receiver can be attached to
this slot.
Memo :
0
When removing the cover, avoid losing the
screws, etc.
0
Check the “INSTRUCTIONS” of the wireless
receiver.
V
Shoulder Belt Mount (x2)
For mounting a shoulder belt (sold separately).
Caution :
0
Be sure to use a shoulder belt with the strength
to
withstand
the weight of this camera recorder.
0
If the shoulder belt is not properly attached, the
camera recorder may fall and cause injuries.
0
Check the [INSTRUCTIONS] provided with the
shoulder belt before using.
W
Shoe
For mounting separately sold video lights and
accessories.
(A P31 [Attaching the Video Light (Sold
Separately)] )
Names of Parts
23
Introduction